We have three of these Tier1 Pool & Spa Filter Cartridge Replacement PAS-1657 #97630 available. These Filter Cartridges are New and come out of boxes.

Save up to $54.99 with our everyday low price of $38.00. $92.99 Retail Value.

This product is available for in store purchase only. Pictures are internet photos of the product. Product details are listed below. If you are interested please call us first to ensure item is still available. or feel free to come down to our store to check us out.

**TO SEE MORE OF OUR INVENTORY, CLICK ON THE "MORE ADS BY SELLER" LINK BELOW **

Our Information:

The Liquidation Team

64 West Center Street

Orem, UT 84057

(801) 226-2200

Hours: M-F 9 am - 8 pm Sat. 10 am - 6 pm

Information about this product:

Tier1 Pool & Spa Filter Cartridge Replacement

Model: PAS-1657

• Reduces sediment for up to 3 months
• Prolong the life and performance of the filter by rinsing it between changes
• Fits in place of Filbur FC-1287, Pleatco PXST175, and Unicel C-8317 filters.
• Top and Bottom hole size: 4 inches

The PAS-1657 Tier1 replacement pool and spa filter is built to quickly and efficiently clean your water while protecting your investment. 175 square feet of 3 ounce pleated fabric media makes a strong filter that works efficiently, even when loaded with sediment. The highly durable polypropylene core helps holds this media, and maintain a great flow rate.

The Tier1 Pool and Spa Filters provide quality filtration that will keep your pool clean all summer long! This filter protects your pool equipment from sand and sediment that could be cause damage. This filter is easy to install and maintenance is a breeze. Reduce the stress of keeping your pool clean by using the Tier1 Pool and Spa Filter! Enjoy your Summer!

• Compatible Models: Replacement for Hayward CCX1750-RE, Pleatco PXST175, Filbur FC-1287, Unicel C-8317, Waterway 817-0150N, Hayward X-stream 175, Hayward X-Stream CC1750, Clearwater II Pool Filter and Waterway Pro Clean, 817-0150P, SD-00391 filtration cartridges
• Keep the Water Clean: The pleated fabric filter maximizes contact between filter media, allowing for greater capacity and reduction. The durable & washable 175 sq ft fabric has tight porosity and a dense weave which sifts out unwanted hair, leaves, dust, sediment, sand, etc. with a high strength, high flow design.
• Fit and Dimensions: The cartridge is designed for systems that use a 8 15/16 inches (Outside diameter) x 23 1/4 inches (Length) spa or pool filter.
• Easy to Install & Maintain: Fits and performs just as well as the original equipment manufacturer product. It is recommended that you change your pool or spa filter when the pressure gauge on the filter tank reaches 8 psi above the pressure recorded when first installed.
• Quality Standards: Tier1 filters pass rigid design, manufacturing, and filament testing delivering a product that is built for performance and priced for value

Pleated Filter Media Pleated filters are more structurally stable than non pleated and also maximize the effectiveness of your filter by exposing contaminants to an increased surface area. With more high durability fabric to sift out unwanted particles you can rest easy knowing your water will be clear for the lifetime of the product.

Washable Pleats Extend the life and increase efficiency of your filter by cleaning it with a gentle stream of water. When you're filling your pool, remove and rinse your filter at the same time! Do not use high pressure pressure hoses or abrasive brushes as this can damage the filter. Tier1 also offers a Pool Filter Wand Brush that attaches to the end of any standard garden hose.

Sand and Sediment Reduction Keeps your pool clean and pump free from sand and sediment that would otherwise cause damage or equipment failure.

Easy Installation and Maintenance 1. Replace your filter when the pressure gauge on your filter tank reaches 8 psi above the pressure recorded when first installed.

1. Turn off the power to your pump and bleed the excess air pressure of the system using the air valve on the filter.

2. Remove any band clamps and/or lids to your filter.

3. Remove the cartridge from the filter canister and dislodge any loose debris

4. Rinse the cartridge thoroughly with clean fresh water and return it to the filter tank. Secure the tank lid and any band clamps.

Product information - Product Dimensions 23.18 x 9.87 x 9.87 inches

• Item Weight 8.3 pounds
• Manufacturer Tier1
• Country of Origin China
• Item model number PAS-1657

RJ