2020 John Deere 2025R
16 Hours
672
51
$19,900.00
Sales
Communications with the seller may be sent to KSL Cars, its service providers, and the dealer.
Description
Condition
Engine power (gross) SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm Power take-off (PTO) power 12.8 kW 17.2 hp Steering hydraulics 13.4 L/min 3.5 gpm Implement hydraulics 13.4 L/min 3.5 gpm Hitch type Limited Category 1 Lift capacity, 24-in. behind link arms 415 kg 915 lb Standard transmission; forward/reverse Hydrostatic - two range Cruise control Standard Approximate shipping weight (open-station; cab) Open station: 849 kg 1872 lb Cab: 1085 kg 2392 lb Wheelbase 1600 mm 63 in. Key Specs Manufacturer Yanmar® Engine model 3TNV80F-NCJT Engine power (gross) SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm Power take-off (PTO) power 12.8 kW 17.2 hp Rated engine speed 3200 rpm Type Diesel Injection pump type Indirect injection Aspiration Natural Emissions compliance Final Tier 4 Cylinders/displacement Three cylinders: 1.267 L 77 cu in. Number of cylinders Three Cylinder liners Cast-in-block Bore and stroke 80 x 84 mm 3.2 x 3.3 in. Compression ratio 23.1:01 Lubrication Pressurized Cooling system Water pump Air cleaner Dual element Engine torque at rated speed 53.1 Nm 39.1 lb-ft Fuel tank capacity 20.4 L 5.39 gal. Engine Battery size 500 CCA Alternator (12-V) 40 amp Starter size 1.2 kW 1.6 hp Electrical Type Indirect injection Fuel system Standard transmission; forward/reverse Hydrostatic - two range Left-hand reverser No Final drive Spur gear Brakes Wet disc Steering Power steering Axle capacity Front 612 kg 1349 lb Rear 1100 kg 2425 lb Creeper No Cruise control Standard Differential lock Yes Transmission Type Open center Pump rated output Steering 13.25 L/min 3.5 gpm Implement 13.25 L/min 3.5 gpm 26.5 L/min 7.0 gpm Pump type Gear Maximum operating pressure 137 bar 1987 psi Draft control sensing Position control Remote control valves available Two Hydraulics Type Limited Category 1 Lift capacity, 24-in. behind link arms 415 kg 915 lb 3-point hitch Standard Rear - 540 rpm Mid - 2100 rpm Control Independent Clutch Wet disk Brake (for mid and rear PTO) Wet disk Power take-off (PTO) Crankcase with filter 2.7 L 2.9 gal. Fluid capacities Available at Young Tractor Brigham
Page Stats
Safe. Simple. Trusted.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
2020 John Deere 2025R
16 Hours
672
51
$19,900.00
Sales
Communications with the seller may be sent to KSL Cars, its service providers, and the dealer.
Page Stats
Safe. Simple. Trusted.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
Description
Condition
Engine power (gross) SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm Power take-off (PTO) power 12.8 kW 17.2 hp Steering hydraulics 13.4 L/min 3.5 gpm Implement hydraulics 13.4 L/min 3.5 gpm Hitch type Limited Category 1 Lift capacity, 24-in. behind link arms 415 kg 915 lb Standard transmission; forward/reverse Hydrostatic - two range Cruise control Standard Approximate shipping weight (open-station; cab) Open station: 849 kg 1872 lb Cab: 1085 kg 2392 lb Wheelbase 1600 mm 63 in. Key Specs Manufacturer Yanmar® Engine model 3TNV80F-NCJT Engine power (gross) SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm Power take-off (PTO) power 12.8 kW 17.2 hp Rated engine speed 3200 rpm Type Diesel Injection pump type Indirect injection Aspiration Natural Emissions compliance Final Tier 4 Cylinders/displacement Three cylinders: 1.267 L 77 cu in. Number of cylinders Three Cylinder liners Cast-in-block Bore and stroke 80 x 84 mm 3.2 x 3.3 in. Compression ratio 23.1:01 Lubrication Pressurized Cooling system Water pump Air cleaner Dual element Engine torque at rated speed 53.1 Nm 39.1 lb-ft Fuel tank capacity 20.4 L 5.39 gal. Engine Battery size 500 CCA Alternator (12-V) 40 amp Starter size 1.2 kW 1.6 hp Electrical Type Indirect injection Fuel system Standard transmission; forward/reverse Hydrostatic - two range Left-hand reverser No Final drive Spur gear Brakes Wet disc Steering Power steering Axle capacity Front 612 kg 1349 lb Rear 1100 kg 2425 lb Creeper No Cruise control Standard Differential lock Yes Transmission Type Open center Pump rated output Steering 13.25 L/min 3.5 gpm Implement 13.25 L/min 3.5 gpm 26.5 L/min 7.0 gpm Pump type Gear Maximum operating pressure 137 bar 1987 psi Draft control sensing Position control Remote control valves available Two Hydraulics Type Limited Category 1 Lift capacity, 24-in. behind link arms 415 kg 915 lb 3-point hitch Standard Rear - 540 rpm Mid - 2100 rpm Control Independent Clutch Wet disk Brake (for mid and rear PTO) Wet disk Power take-off (PTO) Crankcase with filter 2.7 L 2.9 gal. Fluid capacities Available at Young Tractor Brigham
