This Vivitar flash comes with these accessories:

HVP-1 high voltage pack (battery not included) and HVP-1 cable specific to the 292

RS-1 remote sensor and SL-2 remote trigger

Wide angle adapter (adds 5 degrees vertical and 20 degrees horizontal), attached to flash

The charger is also included. Included, but not shown, are a case for the flash, boxes for the sensor and trigger, and instructions for the flash, sensor, and trigger.

The included NC-2 Ni-Cd battery pack is dead and needs to be re-celled by a professional. The flash was tested with another power source about 2 years ago--the capacitor reformed and the unit flashed as expected.

The Ni-Cd pack could also be changed out for a NiMH pack and charged outside of the flash.

This flash must not be used with today's digital cameras. Due to the voltage present on the hot shoe (230 volts), it should only be used with vintage film cameras that expect that voltage, or triggered by the SL-2.

The remote trigger will fire the unit by any short, intense light source, including today's flash units and some LED flash lights that can blink.

Flash is rated at a guide number of 365 at ASA (ISO) of 800, equivalent to 3,400 BCPS.

Cash only, no trades or exchanges, no shipping, pick up only in Orem or American Fork.