I have two sets of good heads with casting numbers 14096217 for $250. a pair.

350 Small block complete for $1200. runs good here it run, it is still in the boat, This motor has the #217 heads on it at approximately 285 horse power, awesome motors to drop in a car or truck with much more horse power than a stock 350.

Another set of SBC marine heads with number 14102193...87-up...305/350......1.94"/1.5" valves. $150. for the #193 set.

The 217 heads came off a 285 horse power marine crate motor, lots of info online about the 217 heads producing 285 to 320 horse power. Some online info is 14096217 Iron heads, are center bolt. They are 1987+ (and later) and feature 72 degree center bolts. Valves are 1.94 and 1.5 with 64cc combustion chambers. $250. for the set.

These are the iron equivalent of the L98 head, they were used a lot on non Z-28 or 'Vette, 350, TPI engines of the late 1980's. They also showed up on some passenger cars with TBI.

These heads were also used on Marine 350 engines, including TBI marine engines. Power ratings were up to 320 HP depending on application. GM DID make a 300 HP crate engine with the "217" heads on it. The same engine now comes with "062" Vortec heads and makes an extra 30 HP. The 330 HP 350 HO replaced the now discontinued 300 HP 350 HO.

Edelbrock carburetors numbers 4262 for small block or the __ for the big block 100.00 each

Two good re- buildabel Qaudrojets for 50.00 each.

Good Qaudrojet Carb for 100.00.

One 750 Holley Dbbl pumper for 100.00

Holley 650 for 50.00

Text is best. If you just click the "Is It Still Available link" with out a question about a particular item attached you wont get a reply. That link creates a lot of spam, please add a question to it or send a separate text. I most often can not answer the phone.