


























1 Hour
59
2
$500.00
VenmoThese are the Ronal R28 alloy wheels in 16x7.5 5x112 with an ET35 and the center bore is 70 mm (hub side) and then tapers to 52mm (center cap side). See Photos.
For a comparison, I have another set of exact same style Ronals on my 90 Vanagon (See Photos) but with an ET20. These Ronals will fit Vanagons BUT will need wheel spacers, i.e. 15mm.
Wheel Specs:
Size - 16x7.5
Lug Pattern - 5x112
Offset - ET35
Bore Size - 70mm (Hub Side) tapering to 52mm (Center Cap Side). See Photos.
So what does this mean if fitting to a VW Vanagon ? (80-91 USDM) The offset is critical. Since I'm running the exact same spec Ronals BUT with an ET20, these will fit a Vanagon if using wheel spacers of 15mm.
Normally, the Vanagon center cap will protrude THROUGH the stock steel or alloy rims. That is not the case with these Ronals. With proper offset, the rims will sit just fine.
If you are considering these for the VW Vanagon then find and read the following on the Samba:
"What wheels fit?" The ultimate wheel post.
Ultimate Wheel Post - Part Two
With that you will know more that you could possibly image about VW Vanagon Wheel/Tire fitment.
I’m hoping to find a buyer locally but I may possibly be open to shipping. Check your fitment specs. Spacers may be needed depending on the application.
Cash or Venmo. No Scams. Peace.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.




1 Hour
59
2
$500.00
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.



























VenmoThese are the Ronal R28 alloy wheels in 16x7.5 5x112 with an ET35 and the center bore is 70 mm (hub side) and then tapers to 52mm (center cap side). See Photos.
For a comparison, I have another set of exact same style Ronals on my 90 Vanagon (See Photos) but with an ET20. These Ronals will fit Vanagons BUT will need wheel spacers, i.e. 15mm.
Wheel Specs:
Size - 16x7.5
Lug Pattern - 5x112
Offset - ET35
Bore Size - 70mm (Hub Side) tapering to 52mm (Center Cap Side). See Photos.
So what does this mean if fitting to a VW Vanagon ? (80-91 USDM) The offset is critical. Since I'm running the exact same spec Ronals BUT with an ET20, these will fit a Vanagon if using wheel spacers of 15mm.
Normally, the Vanagon center cap will protrude THROUGH the stock steel or alloy rims. That is not the case with these Ronals. With proper offset, the rims will sit just fine.
If you are considering these for the VW Vanagon then find and read the following on the Samba:
"What wheels fit?" The ultimate wheel post.
Ultimate Wheel Post - Part Two
With that you will know more that you could possibly image about VW Vanagon Wheel/Tire fitment.
I’m hoping to find a buyer locally but I may possibly be open to shipping. Check your fitment specs. Spacers may be needed depending on the application.
Cash or Venmo. No Scams. Peace.



