






































9 Days
41
0
$180.00
Venmo14.00 These brad point drill bits are excellent for both home repair and woodworking use. The brad point bits have a center-point design that keeps the drill bit from skating as it enters the wood, resulting in perfectly smooth, splinter-free holes. • Provides perfectly round, splinter-free holes • Center point keeps bit from skating • 3/8 in. shanks • Includes commonly used sizes: 1/8 in., 3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in.
18.00 Drill Master 6 Piece Stubby Auger Bit Set Make fast, clean holes in both hard and soft woods\
20.00. This Forstner bit set excels at doweling, creating pocket and grommet holes, countersinking screws, and drilling out knots in wood. The pre-sharpened bits cut precision holes without tear-out or burning. Bits over 1 in. have a saw tooth design for faster cutting. • Pre-sharpened bits cut precision flat-bottomed holes without tear-out • Bits over 1 in. have saw tooth design • Hardened and precision-machined edges, precision-ground heads
• High-carbon steel construction • 3/8 in. reinforced shanks • • 20.00 These are carbide-tipped glass and tile drill bits, likely from theBosch GT2000 4-piece set. • Designed for drilling in glass, tile, and ceramics. • Features a precision tip to prevent "bit walking" or wandering when starting a hole. • The reinforced head and carbide tip maximize bit life in hard materials. • Shanks are flat on three sides for superior grip and to prevent slippage in the drill chuck
• 18.00. 13-piece left hand drill set includes sizes 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 inch diameters in steel index storage box • Removes broken or twisted common screws and bolts • Indispensable if you don't want to drive the screw through the hole • Perfect drill to make pilot holes for screw extractor • 135 degree high speed steel • No UPC Code • Packaged in a white box • As pictured
65 00 The image shows a set of Milwaukee SHOCKWAVE Impact Duty step drill bits. • Engineered for use in impact drivers and standard drills. • Feature a Titanium Aluminum Nitride (TiAlN) coating for extended life. • The bits have a 1/4 inch hex shank for durability. • Designed with a dual spiral flute and Rapid Strike Tip for faster, cleaner holes. • The sizes visible on the bits include 5/8", 11/16", 3/4", 13/16", and 7/8".
10.00 This 3-piece set of titanium-coated, high-speed steel bits replaces 28 individual drill bits. That means you don’t have to constantly change bits when drilling a range of holes on a single project. • Cool-running titanium coating lasts longer than uncoated bits • High-speed steel for longer life • Automatically deburrs holes while drilling • 2-flute design for faster, smoother cutting • Tri-flat shank won't slip when drilling
20.00 The image shows a Milwaukee #9 Step Drill Bit (part number 48-89-9209). • Hole Sizes:Designed to drill two sizes: 7/8" and 1 1/8". • Material:Made of high-speed steel with a black oxide finish to prevent corrosion. • Rapid Strike Tip:Features a tip designed for fast, accurate starts and less heat generation. • Performance:Optimized for use with cordless drills in high speed, offering jam-free performance. • Usage:Ideal for drilling holes in materials like steel and plastic.
80.00 Constructed from solid tungsten carbide for use with hard materials, this burr set is precision milled with double-cutting edges. Designed for high-speed operation, these burrs have a 1/4 in. universal shank for use in pneumatic or electric die grinders. Ideal for cutting, grinding, and shaping cast iron, steel, and stainless steel. • Tungsten carbide construction is heat resistant for smooth chamfering, milling and deburring • Double cutt
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.









9 Days
41
0
$180.00
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.







































Venmo14.00 These brad point drill bits are excellent for both home repair and woodworking use. The brad point bits have a center-point design that keeps the drill bit from skating as it enters the wood, resulting in perfectly smooth, splinter-free holes. • Provides perfectly round, splinter-free holes • Center point keeps bit from skating • 3/8 in. shanks • Includes commonly used sizes: 1/8 in., 3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in.
18.00 Drill Master 6 Piece Stubby Auger Bit Set Make fast, clean holes in both hard and soft woods\
20.00. This Forstner bit set excels at doweling, creating pocket and grommet holes, countersinking screws, and drilling out knots in wood. The pre-sharpened bits cut precision holes without tear-out or burning. Bits over 1 in. have a saw tooth design for faster cutting. • Pre-sharpened bits cut precision flat-bottomed holes without tear-out • Bits over 1 in. have saw tooth design • Hardened and precision-machined edges, precision-ground heads
• High-carbon steel construction • 3/8 in. reinforced shanks • • 20.00 These are carbide-tipped glass and tile drill bits, likely from theBosch GT2000 4-piece set. • Designed for drilling in glass, tile, and ceramics. • Features a precision tip to prevent "bit walking" or wandering when starting a hole. • The reinforced head and carbide tip maximize bit life in hard materials. • Shanks are flat on three sides for superior grip and to prevent slippage in the drill chuck
• 18.00. 13-piece left hand drill set includes sizes 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 inch diameters in steel index storage box • Removes broken or twisted common screws and bolts • Indispensable if you don't want to drive the screw through the hole • Perfect drill to make pilot holes for screw extractor • 135 degree high speed steel • No UPC Code • Packaged in a white box • As pictured
65 00 The image shows a set of Milwaukee SHOCKWAVE Impact Duty step drill bits. • Engineered for use in impact drivers and standard drills. • Feature a Titanium Aluminum Nitride (TiAlN) coating for extended life. • The bits have a 1/4 inch hex shank for durability. • Designed with a dual spiral flute and Rapid Strike Tip for faster, cleaner holes. • The sizes visible on the bits include 5/8", 11/16", 3/4", 13/16", and 7/8".
10.00 This 3-piece set of titanium-coated, high-speed steel bits replaces 28 individual drill bits. That means you don’t have to constantly change bits when drilling a range of holes on a single project. • Cool-running titanium coating lasts longer than uncoated bits • High-speed steel for longer life • Automatically deburrs holes while drilling • 2-flute design for faster, smoother cutting • Tri-flat shank won't slip when drilling
20.00 The image shows a Milwaukee #9 Step Drill Bit (part number 48-89-9209). • Hole Sizes:Designed to drill two sizes: 7/8" and 1 1/8". • Material:Made of high-speed steel with a black oxide finish to prevent corrosion. • Rapid Strike Tip:Features a tip designed for fast, accurate starts and less heat generation. • Performance:Optimized for use with cordless drills in high speed, offering jam-free performance. • Usage:Ideal for drilling holes in materials like steel and plastic.
80.00 Constructed from solid tungsten carbide for use with hard materials, this burr set is precision milled with double-cutting edges. Designed for high-speed operation, these burrs have a 1/4 in. universal shank for use in pneumatic or electric die grinders. Ideal for cutting, grinding, and shaping cast iron, steel, and stainless steel. • Tungsten carbide construction is heat resistant for smooth chamfering, milling and deburring • Double cutt








