Dell Poweredge R440 Server | 14 CPU Cores, 64GB RAM, iDRAC Enterprise | Low Power Draw!
6 Hours
67
2
$460.00
GCB
GCB Servers & Service Center
Description
Condition
Model: Dell Poweredge R440 - 1U Rackmount Server
Power Draw: Server idles at 98W in the current configuration, tested in a desktop Linux environment
CPU: 1x Intel Xeon Gold 5120 - 14 Cores/28 Threads running between 2.20GHz-3.2GHz | Second CPU Socket unoccupied
RAM: 64GB ECC DDR4
Storage Drives: None, various SSDs/HDDs available for purchase in-store
Storage System: 4x Front 3.5" Hot-Swap SAS/SATA Bays
Storage Controller: Dell PERC H330 - Dual Mode Controller, supports both Hardware RAID/IR Mode, and HBA/IT Mode
Secondary Storage Systems: None
Remote Management: iDRAC9 Enterprise
Networking: 2x 1GbE RJ-45 Ethernet Ports
Rails: None
Bezel: Available for $10, while supplies last
Power: Dual Hot-Swap Redundant 550W PSUs
PCI-E Cards: None
Available Upgrades: RAM, Storage, Networking
Additional Notes: The H330 can be configured for Software RAID, No RAID, or Hardware RAID
Work Done:
- BIOS, iDRAC, LC, and RAID have all been reset and cleared
- All available firmware updates have been applied
- The RAM has been replaced with tested modules from our inventory
- The CPU has been replaced with a higher performance model
- The CPU and Heatsink have been thoroughly cleaned, and new Arctic thermal paste has been applied
Additional information is available upon request
This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.
If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.
Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.
www.servers.gcbcomputers.com
Page Stats
Safe. Simple. Trusted.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
Dell Poweredge R440 Server | 14 CPU Cores, 64GB RAM, iDRAC Enterprise | Low Power Draw!
6 Hours
67
2
$460.00
GCB
GCB Servers & Service Center
Page Stats
Safe. Simple. Trusted.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
Description
Condition
Model: Dell Poweredge R440 - 1U Rackmount Server
Power Draw: Server idles at 98W in the current configuration, tested in a desktop Linux environment
CPU: 1x Intel Xeon Gold 5120 - 14 Cores/28 Threads running between 2.20GHz-3.2GHz | Second CPU Socket unoccupied
RAM: 64GB ECC DDR4
Storage Drives: None, various SSDs/HDDs available for purchase in-store
Storage System: 4x Front 3.5" Hot-Swap SAS/SATA Bays
Storage Controller: Dell PERC H330 - Dual Mode Controller, supports both Hardware RAID/IR Mode, and HBA/IT Mode
Secondary Storage Systems: None
Remote Management: iDRAC9 Enterprise
Networking: 2x 1GbE RJ-45 Ethernet Ports
Rails: None
Bezel: Available for $10, while supplies last
Power: Dual Hot-Swap Redundant 550W PSUs
PCI-E Cards: None
Available Upgrades: RAM, Storage, Networking
Additional Notes: The H330 can be configured for Software RAID, No RAID, or Hardware RAID
Work Done:
- BIOS, iDRAC, LC, and RAID have all been reset and cleared
- All available firmware updates have been applied
- The RAM has been replaced with tested modules from our inventory
- The CPU has been replaced with a higher performance model
- The CPU and Heatsink have been thoroughly cleaned, and new Arctic thermal paste has been applied
Additional information is available upon request
This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.
If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.
Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.
www.servers.gcbcomputers.com
