Model: Dell Poweredge R530 - 2U Rackmount Server

CPU: 2x Intel Xeon E5-2660 V4's - Each one has 14 Cores/28 Threads running between 2.0GHz-3.2GHz | 28 Cores/56 Threads Total

RAM: 64GB ECC DDR4 (Registered ECC DIMMs)

Storage Drives: None, various SSD/HDD are available for purchase in-store

Storage System: 8x Front 3.5" Hot-Swap SAS/SATA Bays (All Trays Incl.)

Storage Controller: Dell PERC H730 Dual Mode Controller - Supports Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

Remote Management: iDRAC 8 Basic

Networking: 2x 1GbE RJ-45 Ethernet Ports

‎

Rails: None

Bezel: None

Power: 2x Hot-Swap Redundant 495W PSUs (Only 1 PSU is shown in photos, you can get 1 PSU or 2 PSUs depending on your preference)

PCI-E Cards: None

Available Upgrades: Storage, Networking, PSUs

Additional Notes: None

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared
• All available firmware updates have been applied
• The RAM has been replaced with tested modules from our inventory
• The CPUs have been replaced with those of a higher performance model (E5-2620 V3 -> E5-2660 V4)
• The replacement CPUs and Heatsinks were thoroughly cleaned, and new Arctic thermal paste has been applied

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com