Model: Dell Poweredge R730 - 2U Rackmount Server

CPU: 2x Intel Xeon E5-2680 V3's - Each one has 12 Cores/24 Threads running between 2.5GHz-3.3GHz | 24 Cores/48 Threads Total

RAM: 64GB ECC DDR4 (Registered ECC DIMMs)

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 16x Front 2.5" Hot-Swap Bays (2x Trays Incl.)

Storage Controller: Dell PERC H730 Dual Mode Controller - Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

Remote Management: iDRAC 8 Enterprise

Networking: 4x 1GbE RJ-45 Ethernet Ports

‎

Rails: Available for $70, with purchase of this server

Bezel: None

Power: Dual Hot-Swap 750W Redundant PSUs

PCI-E Cards: None

Available Upgrades: Storage, Networking, PSUs, Rails

Additional Notes: The motherboard has been replaced with another R730 motherboard, so the MB's Service Tag does not match the chassis'. This is purely cosmetic, and makes no functional difference.

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared
• All available firmware updates have been applied
• The CPUs have been replaced with those of a higher performance model (2x E5-2667 V3 -> 2x E5-2680 V3)
• The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com