Model: Dell Poweredge R630 - 1U Rackmount Server

CPU: 2x Intel Xeon E5-2697 V4's - Each one has 18 Cores/36 Threads running between 2.3GHz-3.6GHz | 36 Cores/72 Threads Total

RAM: 96GB ECC DDR4 (Registered ECC DIMMs)

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 8x Front 2.5" Hot-Swap SAS/SATA Bays (4x Trays Incl.)

Storage Controller: Dell PERC H730 Dual Mode Controller - Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

Remote Management: iDRAC 8 Enterprise

Networking: 4x RJ-45 Ethernet Ports [2x10G|2x1G]

‎

Rails: None, available for $20 with purchase of this server

Bezel: None, available for $10

Power: Dual Hot-Swap Redundant 495W PSUs

PCI-E Cards: None, 3x Half Height PCIe Slots unoccupied

Available Upgrades: Storage, Networking, Rails, Bezel, PSUs

Additional Notes: None

Work Done:

• BIOS, iDRAC, and Lifecycle Controller have all been reset and cleared
• All available firmware updates have been applied
• The RAM has been replaced with tested modules from our inventory
• The CPUs have been replaced with those of a higher performance model (2x E5-2620V4 -> 2x E5-2697 V4)
• The NDC has been replaced with a higher performance model (4x1G RJ-45 -> 2x10G/2x1G RJ-45)
• The PERC H730 has been added

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com