Dell Poweredge R730XD Server | 28 CPU Cores, 128GB RAM, 10G Networking, iDRAC Enterprise
7 Hours
22
0
$540.00
GCB
GCB Servers & Service Center
Description
Condition
Model: Dell Poweredge R730XD - 2U Rackmount Server
CPU: 2x Intel Xeon E5-2680 V4's - Each one has 14 Cores/28 Threads running between 2.4GHz-3.3GHz | 28 Cores/56 Threads Total
RAM: 128GB ECC DDR4 (Registered ECC DIMMs)
Storage Drives: None, various SSDs/HDDs available for purchase in-store
Storage System: 24x Front & 2x Rear 2.5" Hot-Swap Bays (4x Trays Incl.)
Storage Controller: Dell PERC H730 Dual Mode Controller - Supports Hardware RAID/IR Mode and Software RAID/HBA/IT Mode
Remote Management: iDRAC 8 Enterprise
Networking: 2x 10G SFP+ & 2x 1G RJ-45
Rails: Available for $70, with purchase of this server
Bezel: None
Power: Dual Hot-Swap 750W Redundant PSUs
PCI-E Cards: None
Available Upgrades: Storage, Networking, PSUs, Rails
Additional Notes: This unit has a slight bend in the chassis, on the front about 1/3 in from the left. Drives still fit and function, they just don't slide in/out of the drive bays as smoothly as they normally would. This has no effect on the functionality of the server once they're installed, though.
Work Done:
- BIOS, iDRAC, LC, and RAID have all been reset and cleared
- All available firmware updates have been applied
- The RAM has been replaced with tested modules from our inventory
- The CPUs have been replaced with those of a higher performance model
- The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied
Additional information is available upon request
This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.
If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.
Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.
www.servers.gcbcomputers.com
Page Stats
Safe. Simple. Trusted.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
Dell Poweredge R730XD Server | 28 CPU Cores, 128GB RAM, 10G Networking, iDRAC Enterprise
7 Hours
22
0
$540.00
GCB
GCB Servers & Service Center
Page Stats
Safe. Simple. Trusted.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
Description
Condition
Model: Dell Poweredge R730XD - 2U Rackmount Server
CPU: 2x Intel Xeon E5-2680 V4's - Each one has 14 Cores/28 Threads running between 2.4GHz-3.3GHz | 28 Cores/56 Threads Total
RAM: 128GB ECC DDR4 (Registered ECC DIMMs)
Storage Drives: None, various SSDs/HDDs available for purchase in-store
Storage System: 24x Front & 2x Rear 2.5" Hot-Swap Bays (4x Trays Incl.)
Storage Controller: Dell PERC H730 Dual Mode Controller - Supports Hardware RAID/IR Mode and Software RAID/HBA/IT Mode
Remote Management: iDRAC 8 Enterprise
Networking: 2x 10G SFP+ & 2x 1G RJ-45
Rails: Available for $70, with purchase of this server
Bezel: None
Power: Dual Hot-Swap 750W Redundant PSUs
PCI-E Cards: None
Available Upgrades: Storage, Networking, PSUs, Rails
Additional Notes: This unit has a slight bend in the chassis, on the front about 1/3 in from the left. Drives still fit and function, they just don't slide in/out of the drive bays as smoothly as they normally would. This has no effect on the functionality of the server once they're installed, though.
Work Done:
- BIOS, iDRAC, LC, and RAID have all been reset and cleared
- All available firmware updates have been applied
- The RAM has been replaced with tested modules from our inventory
- The CPUs have been replaced with those of a higher performance model
- The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied
Additional information is available upon request
This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.
If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.
Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.
www.servers.gcbcomputers.com
