Dell Poweredge R730XD Server | 28 CPU Cores, 128GB RAM, 10G Networking, 12x HDD Bays and 2x SSD Bays
5 Days
78
1
$600.00
GCB
GCB Servers & Service Center
Description
Condition
Model: Dell Poweredge R730XD - 2U Rackmount Server
CPU: 2x Intel Xeon E5-2660 V4's - Each one has 14 Cores/28 Threads running between 2.0GHz-3.2GHz | 28 Cores/56 Threads Total
RAM: 128GB ECC DDR4 (Registered ECC DIMMs)
Storage Drives: None, various SSDs/HDDs available for purchase in-store
Storage System: 12x Front 3.5" & 2x Rear 2.5" Hot-Swap SAS/SATA Bays (All Trays Incl.)
Storage Controller: Dell PERC HBA330 - True IT Mode Controller
Remote Management: iDRAC 8 Enterprise
Networking: 4x RJ-45 Ethernet Ports [2x10G|2x1G]
Rails: None
Bezel: None
Power: Dual Hot-Swap 1100W Redundant PSUs
PCI-E Cards: None
Available Upgrades: Storage, Networking, Rails
Additional Notes: This server has some cosmetic damage to the rear carry handle, it does not affect the I/O such as USB, VGA, Ethernet, etc.
Additional Notes: This server is missing one of the rail pegs on the side, it may not be stable on sliding rails.
Work Done:
- BIOS, iDRAC, and LC have all been reset and cleared
- The RAM has been replaced with tested modules from our inventory
- The original single CPU has been upgraded to a pair of higher performance CPUs
- The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied
Additional information is available upon request
This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.
If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.
Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.
www.servers.gcbcomputers.com
Page Stats
Safe. Simple. Trusted.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
Dell Poweredge R730XD Server | 28 CPU Cores, 128GB RAM, 10G Networking, 12x HDD Bays and 2x SSD Bays
5 Days
78
1
$600.00
GCB
GCB Servers & Service Center
Page Stats
Safe. Simple. Trusted.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
Description
Condition
Model: Dell Poweredge R730XD - 2U Rackmount Server
CPU: 2x Intel Xeon E5-2660 V4's - Each one has 14 Cores/28 Threads running between 2.0GHz-3.2GHz | 28 Cores/56 Threads Total
RAM: 128GB ECC DDR4 (Registered ECC DIMMs)
Storage Drives: None, various SSDs/HDDs available for purchase in-store
Storage System: 12x Front 3.5" & 2x Rear 2.5" Hot-Swap SAS/SATA Bays (All Trays Incl.)
Storage Controller: Dell PERC HBA330 - True IT Mode Controller
Remote Management: iDRAC 8 Enterprise
Networking: 4x RJ-45 Ethernet Ports [2x10G|2x1G]
Rails: None
Bezel: None
Power: Dual Hot-Swap 1100W Redundant PSUs
PCI-E Cards: None
Available Upgrades: Storage, Networking, Rails
Additional Notes: This server has some cosmetic damage to the rear carry handle, it does not affect the I/O such as USB, VGA, Ethernet, etc.
Additional Notes: This server is missing one of the rail pegs on the side, it may not be stable on sliding rails.
Work Done:
- BIOS, iDRAC, and LC have all been reset and cleared
- The RAM has been replaced with tested modules from our inventory
- The original single CPU has been upgraded to a pair of higher performance CPUs
- The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied
Additional information is available upon request
This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.
If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.
Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.
www.servers.gcbcomputers.com
