Model: Dell Poweredge R430 - 1U Rackmount Server

CPU: 1x Intel Xeon E5-2620 V3 - 6 Cores/12 Threads running between 2.4GHz-3.2GHz | Second CPU Socket unoccupied

RAM: 32GB Registered ECC DDR4 (4x8GB)

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 4x Front 3.5" Hot-Swap SATA Bays (All 4x Trays Incl.)

Storage Controller: Integrated SATA Controller

Remote Management: iDRAC 8 Basic

Networking: 4x 1GbE RJ-45 Ethernet Ports

‎

Rails: Available for $20, with purchase of this server

Bezel: Available for $10

Power: Dual Hot-Swap 550W Redundant PSUs

PCI-E Cards: None

Available Upgrades: CPU, Storage, Networking, Rails, Bezel

Additional Notes: The Backplane is compatible with both SAS and SATA drives, however this server does not have a SAS controller, so only SATA drives can be used in it's current configuration

Additional Notes: This server has two CPU Sockets, however only one is currently occupied.

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared
• All available firmware updates have been applied
• The RAM has been replaced with tested modules from our inventory
• The CPU has been replaced with a higher performance model
• The CPU and Heatsink have been thoroughly cleaned, and new Arctic thermal paste has been applied
• 4x Trays have been added

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com