OEM Jeep Wrangler JLU 4-Door Rock Sliders / Rails - Like New Take-Offs
18 Days
98
0
$75.00
Description
Condition
Payment Types Accepted
CashAppSelling a pair of factory original Mopar rock rails taken off a 2023 Jeep Wrangler JLU (4-door) shortly after purchase. They were swapped out for steps and have been sitting safely in the garage for three years. They are essentially new take-offs with zero rock rash or trail damage.
The Specs: Genuine Mopar OEM: Heavy-duty structural steel, not cheap internet knock-offs.
OEM Part Number: 68292910AE (Right) / 68292911AE (Left)
Protection: Built to take a beating and protect your lower body panels from the trail. Profile: These hug the pinch seam tightly for maximum ground clearance.
The Pre-Emptive Q&A (Please read before messaging): -Is this still available? Yes. If this ad is up, they are available. I will delete the listing the second they leave my driveway.
-Will this fit my 2-door? Not unless you plan on popping holes in your rear tires to make them fit. 4-door JLU models only (2018-Present).
-Will this fit my Gladiator? No.
-Can my kids use these as a step to get in? No, they sit flush against the body. If you want a step, go buy steps. If you want to bash rocks without crushing your rocker panels, buy these.
-Will you take a trade? I will make exactly one exception to my cash only rule: I will trade straight up for a functional but ugly hitch-mounted hydraulic crane. I'm looking for a standard 500lb to 1000lb capacity model for an equitable trade, even though my actual loads will max out around 100 lbs. As long as the hydraulics work smoothly, I do not care how hideous or scratched up the paint is. Otherwise, no, I do not want your broken Xbox or a heavily used lawnmower. Cash only.
Does this come with the bolts? No hardware is included. You will need to reuse your factory underbody bolts and pinch seam nuts or grab replacements.
My buddy the AI says (grain of salt - they also have 6 fingers) you will need these if the bolts aren't in place ready to be removed under your Jeep:
-Pinch Seam Nuts (12 total): M6 x 1.00 flange nuts. (These attach to the threaded studs sticking out of the rock rails that go through the pinch seam. They use a 10mm socket). -Underbody Bolts (6 total): M8 x 1.25 x 30mm bolts with wide flat washers. (These thread directly up into the tapped holes in the bottom of the Jeep's floorpan. They use a 13mm socket).
You Might Also Like
OEM Jeep Wrangler JLU 4-Door Rock Sliders / Rails - Like New Take-Offs
18 Days
98
0
$75.00
Description
Condition
Payment Types Accepted
CashAppSelling a pair of factory original Mopar rock rails taken off a 2023 Jeep Wrangler JLU (4-door) shortly after purchase. They were swapped out for steps and have been sitting safely in the garage for three years. They are essentially new take-offs with zero rock rash or trail damage.
The Specs: Genuine Mopar OEM: Heavy-duty structural steel, not cheap internet knock-offs.
OEM Part Number: 68292910AE (Right) / 68292911AE (Left)
Protection: Built to take a beating and protect your lower body panels from the trail. Profile: These hug the pinch seam tightly for maximum ground clearance.
The Pre-Emptive Q&A (Please read before messaging): -Is this still available? Yes. If this ad is up, they are available. I will delete the listing the second they leave my driveway.
-Will this fit my 2-door? Not unless you plan on popping holes in your rear tires to make them fit. 4-door JLU models only (2018-Present).
-Will this fit my Gladiator? No.
-Can my kids use these as a step to get in? No, they sit flush against the body. If you want a step, go buy steps. If you want to bash rocks without crushing your rocker panels, buy these.
-Will you take a trade? I will make exactly one exception to my cash only rule: I will trade straight up for a functional but ugly hitch-mounted hydraulic crane. I'm looking for a standard 500lb to 1000lb capacity model for an equitable trade, even though my actual loads will max out around 100 lbs. As long as the hydraulics work smoothly, I do not care how hideous or scratched up the paint is. Otherwise, no, I do not want your broken Xbox or a heavily used lawnmower. Cash only.
Does this come with the bolts? No hardware is included. You will need to reuse your factory underbody bolts and pinch seam nuts or grab replacements.
My buddy the AI says (grain of salt - they also have 6 fingers) you will need these if the bolts aren't in place ready to be removed under your Jeep:
-Pinch Seam Nuts (12 total): M6 x 1.00 flange nuts. (These attach to the threaded studs sticking out of the rock rails that go through the pinch seam. They use a 10mm socket). -Underbody Bolts (6 total): M8 x 1.25 x 30mm bolts with wide flat washers. (These thread directly up into the tapped holes in the bottom of the Jeep's floorpan. They use a 13mm socket).
You Might Also Like
