Model: Dell Poweredge R630XL (10 Bays) - 1U Rackmount Server

CPU: 2x Intel Xeon E5-2680 V4's - Each one has 14 Cores/28 Threads running between 2.4GHz-3.3GHz | 28 Cores/56 Threads Total

RAM: 96GB Registered ECC DDR4 (6x16GB)

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 10x Front 2.5" Hot-Swap SAS/SATA Bays (6x Trays Incl.)

Storage Controller: Dell PERC H730 Dual Mode Controller - Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

Remote Management: iDRAC 8 Express

Networking: 4x RJ-45 Ethernet Ports [2x10G|2x1G]

‎

Rails: Available for $20 with purchase of this server

Bezel: Available for $10

Power: Dual Hot-Swap 750W Redundant PSUs

PCI-E Cards: None

Available Upgrades: Storage, Networking, PSUs, Rails, Bezel

Additional Notes: This is an OEM model, meaning that the digital branding (shown in BIOS and iDRAC) is different than usual. It has no practical effect on the server though, it'll perform normally.

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared
• All available firmware updates have been applied
• The RAM has been replaced with tested modules from our inventory
• The CPUs have been replaced with higher performance models
• The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied
• The NDC has been replaced with a higher performance model
• One of the PSUs had shipping damaged, it's been replaced

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com