Payment Types Accepted

Venmo

Cash

This device is a Lee Precision Lead Melter, an electric furnace specifically designed for melting lead and other low-melting-point alloys for casting bullets or fishing sinkers.

Device Specifications The red control panel on the side of the unit provides the following technical details: Brand: Lee Precision Model: Often referred to as the "Lee Melter" (SKU 90021) or specifically identified by the component number EM-1138 for the thermostat housing. Electrical: Operates on 120 Volts A.C. only and uses 500 Watts of power. Control: Features an Infinite Heat Control knob with 10 settings, allowing you to adjust temperatures between approximately 450°F and 900°F. Key Features Capacity: This specific model typically holds 4 pounds of metal. Performance: It can melt a full 4-pound load in less than 15 minutes. Design: This is a ladle-pour model, meaning it does not have a bottom-pour spout; you must use a lead ladle to dip the molten metal out of the pot to fill your molds. eBay eBay +3 Safety and Usage Notes Stability: Always place the melter on a stable, heat-resistant workbench. Moisture Warning: Never allow even a single drop of water to enter the molten lead, as it will cause a violent steam explosion (the "tinsel fairy") that spatters hot metal. Ventilation: Use only in well-ventilated areas to avoid inhaling lead