Model: Dell Poweredge R730 - 2U Rackmount Server

CPU: 2x Intel Xeon E5-2640 V4's - Each one has 10 Cores/20 Threads running between 2.4GHz-3.4GHz | 20 Cores/40 Threads Total

RAM: 96GB Registered ECC DDR4

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 8x Front 3.5" Hot-Swap SAS/SATA Bays (All 8x Trays Incl.)

Storage Controller: Dell PERC H730P Dual Mode Controller - Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

Remote Management: iDRAC 8 Express

Networking: 4x 1GbE RJ-45 Ethernet Ports

‎

Rails: Available for $70 with purchase of this server

Bezel: Available for $10

Power: Dual Hot-Swap Redundant 750W PSUs

PCI-E Cards: None

Available Upgrades: Storage, Networking, PSUs, Rails, Bezel

Additional Notes: None

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared
• All available firmware updates have been applied
• The RAM has been replaced with tested modules from our inventory
• The server originally had one CPUs, a second CPU has been installed
• The CPU has been replaced with a pair of upgraded models (1x E5-2620 V3 --> 2x E5-2640 V4)
• The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied
• The PERC H730P has been set to HBA mode, ideal for Software RAID such as ZFS, UnRAID, etc

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com