Handmade Wood Table Lamp, One-of-One, New, Local Discount
2 Hours
6
0
$399.00
Smithereens
Note: KSL, its service providers, and the seller receive data from this message. See our Privacy Notice and TOU for details.
Description
Condition
Payment Types Accepted
Venmo
CashAppMeet Emberline, a newly completed handcrafted driftwood table lamp I built from a single continuous piece of naturally weathered wood. It stands 39 inches tall from the bottom of the base to the top of the finial and has well over a dozen hours of work put into it from design, stabilization, drilling, wiring, finishing, and final assembly. It is meant to be a true statement piece, not a mass-produced lamp.
One of the most distinctive features is the extended natural wood finial, which rises about 10 inches above the shade and creates the look of the driftwood continuing all the way through the lamp. The wood’s naturally occurring cracks and voids have been reinforced and accented with bold red epoxy, adding both structural stability and visual contrast while highlighting the character of the piece. Very few lamps exist like this one.
The wiring is routed internally through the center of the wood so the cord does not distract from the lamp’s silhouette. It sits on a weighted base for added stability and is finished by hand with beeswax and a protective clear coat to bring out the grain and help protect the wood over time.
Additional details:
- Overall height: 39 inches, bottom of base to top of finial
- Shade height from base: about 20 inches to the bottom of the shade, about 29 inches to the top of the shade
- Socket: E26 dark metal turn-key socket switch
- Bulb included: Edison-style bulb, about 40W, for a warm ambient glow
- Cord: approximately 5-foot fabric-wrapped cord
- Hardware: built with supplier-certified UL-listed or seller-listed lamp hardware
- Material: Utah sourced, naturally weathered single-piece driftwood
- Wiring: hidden internal routing through the center of the wood form
- Base: metal, weighted for stability
- Finish: hand-applied beeswax and protective clear coat
- Shade: The black shade is included by default, though I may have other shade options available depending on the look you want.
Most of my buyers are from out of state and I would love for more of my work to find a local home, so I am listing it on KSL at a $100 discount compared to my website price as a local buyer discount, so the price is firm. This is a gallery level piece for less than half the gallery price.
You can see the listing on my website here: https://smithereensco.com/products/emberline
I stand behind my work. This piece includes a 24-month warranty, and if any issue comes up, I will make it right. I take pride in what I build and want it to hold up well over time.
You can see more of my work at: smithereensco.com
Message with any questions!
Handmade Wood Table Lamp, One-of-One, New, Local Discount
2 Hours
6
0
$399.00
Smithereens
Note: KSL, its service providers, and the seller receive data from this message. See our Privacy Notice and TOU for details.
Description
Condition
Payment Types Accepted
VenmoCashAppMeet Emberline, a newly completed handcrafted driftwood table lamp I built from a single continuous piece of naturally weathered wood. It stands 39 inches tall from the bottom of the base to the top of the finial and has well over a dozen hours of work put into it from design, stabilization, drilling, wiring, finishing, and final assembly. It is meant to be a true statement piece, not a mass-produced lamp.
One of the most distinctive features is the extended natural wood finial, which rises about 10 inches above the shade and creates the look of the driftwood continuing all the way through the lamp. The wood’s naturally occurring cracks and voids have been reinforced and accented with bold red epoxy, adding both structural stability and visual contrast while highlighting the character of the piece. Very few lamps exist like this one.
The wiring is routed internally through the center of the wood so the cord does not distract from the lamp’s silhouette. It sits on a weighted base for added stability and is finished by hand with beeswax and a protective clear coat to bring out the grain and help protect the wood over time.
Additional details:
- Overall height: 39 inches, bottom of base to top of finial
- Shade height from base: about 20 inches to the bottom of the shade, about 29 inches to the top of the shade
- Socket: E26 dark metal turn-key socket switch
- Bulb included: Edison-style bulb, about 40W, for a warm ambient glow
- Cord: approximately 5-foot fabric-wrapped cord
- Hardware: built with supplier-certified UL-listed or seller-listed lamp hardware
- Material: Utah sourced, naturally weathered single-piece driftwood
- Wiring: hidden internal routing through the center of the wood form
- Base: metal, weighted for stability
- Finish: hand-applied beeswax and protective clear coat
- Shade: The black shade is included by default, though I may have other shade options available depending on the look you want.
Most of my buyers are from out of state and I would love for more of my work to find a local home, so I am listing it on KSL at a $100 discount compared to my website price as a local buyer discount, so the price is firm. This is a gallery level piece for less than half the gallery price.
You can see the listing on my website here: https://smithereensco.com/products/emberline
I stand behind my work. This piece includes a 24-month warranty, and if any issue comes up, I will make it right. I take pride in what I build and want it to hold up well over time.
You can see more of my work at: smithereensco.com
Message with any questions!
