























4 Hours
11
0
$250.00
Note: KSL, its service providers, and the seller receive data from this message. See our Privacy Notice and TOU for details.
Venmo
CashApp
PayPal
Zelle
ApplePayRockboard Tres 3.0 Complete Pedalboard w/ Power
Great small format pedal board with power supply and patchbay mod containing Cab Sim. Awesome fly-rig and practice setup. Retail value with all mods is over $400 - see below.
Pedalboard - Rockboard Tres 3.0 (by Warwick) ($120) with MOD 5 ($160) (Cab Sim and DI Patchbay), 10 Power Block ($85), and baseplate to hold power block ($56).
RockBoard by Warwick Tres 3.0 Pedalboard - 17.40 inches x 9.29 inches For too long, guitarists and bassists have been asked to make sacrifices when it comes to their pedalboard setups. With RockBoard by Warwick’s Tres 3.0 pedalboard, those days are over. Constructed from a powder coated sheet of cold-rolled aluminum, this pedalboard delivers a lightweight, torsion-resistant, and durable build fully prepared to handle the demands of gigging and travel. The flat, weld-free surface optimizes this pedalboard for total pedal coverage — music to the ears of Sweetwater gearheads who strive to utilize every millimeter of available pedalboard space. Likewise, the slotted design pattern makes mounting your pedals and organizing your pedalboard a cinch, while the undercarriage tackles cable management and can accommodate virtually any standard power block. Lastly, the Tres 3.0 comes stock with mounting holes and a patchbay slot, perfect for easily upgrading your rig with a RockBoard LED Light or MOD. Lightweight, sturdy, durable, spacious, and customizable — the Tres 3.0 pedalboard delivers without compromise
RockBoard by Warwick MOD 5 Pedalboard Patchbay
Built to streamline even the most complex pedalboard configurations, the RockBoard by Warwick MOD 5 consolidates all your connections into one sleek, centralized hub. It houses six selectable stereo cabinet simulations powered by impulse responses (IRs) and an active DI box, allowing you to preserve your meticulously crafted tone regardless of the available backline. The integrated patchbay includes three 1/4-inch TRS thru jacks, an XLR DI output jack, a 1/4-inch parallel TS output jack, and a 1/4-inch parallel IR/DI TS input jack. It also brandishes a 1/8-inch stereo headphone output with adjustable volume and a micro-USB port for loading custom IRs. Furthermore, thanks to its TRS thru connections, setting up 4-cable-method configurations is effortless, enabling you to route certain pedals to your amp's front input while others run through the effects loop. Designed to keep your signal chain clean and organized, the MOD 5 minimizes cable clutter and significantly reduces setup time. And while it's built to integrate seamlessly into RockBoard pedalboards via the MOD slot, it's also fully compatible with a wide range of third-party boards. For added flexibility, the detachable front plate allows for mounting on top of or beneath your board. Whether you're building a new rig or simply elevating an existing one, the RockBoard by Warwick MOD 5 ensures your signature tone travels with you, intact, organized, and ready for any stage.
RockBoard Power Block The RockBoard Power Block is a compact multi-power supply for effects pedals and offers 10 power slots for the parallel power supply of up to 10 pedals. With a total of 1,200 mA for the eight 9V connections and a total of 800 mA for the two 18V connections, modern effects pedal setups can be easily supplied with power. The scope of delivery includes 10 connection cables and an 18V DC power supply (2,000 mA) with exchangeable multi-regional plug adapters.
RockBoard by Warwick Tres 3.0 Base Plate Upgrade your RockBoard pedalboard with the Base Plate — a multipurpose board management solution for protecting, organizing, and storing your cables, power supplies, surplus pedals, and other hardware. The Base Plate’s flat, lightweight design means that it is easily attached to its corresponding board via the included hardware and ensures your setup remains portable and travel friendly.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.











4 Hours
11
0
$250.00
Note: KSL, its service providers, and the seller receive data from this message. See our Privacy Notice and TOU for details.
KSL Classifieds makes it easy to buy and sell with peace of mind. Check our safety tips and quickly report anything that doesn’t look right to keep your experience smooth and secure.
























Venmo
CashApp
PayPal
Zelle
ApplePayRockboard Tres 3.0 Complete Pedalboard w/ Power
Great small format pedal board with power supply and patchbay mod containing Cab Sim. Awesome fly-rig and practice setup. Retail value with all mods is over $400 - see below.
Pedalboard - Rockboard Tres 3.0 (by Warwick) ($120) with MOD 5 ($160) (Cab Sim and DI Patchbay), 10 Power Block ($85), and baseplate to hold power block ($56).
RockBoard by Warwick Tres 3.0 Pedalboard - 17.40 inches x 9.29 inches For too long, guitarists and bassists have been asked to make sacrifices when it comes to their pedalboard setups. With RockBoard by Warwick’s Tres 3.0 pedalboard, those days are over. Constructed from a powder coated sheet of cold-rolled aluminum, this pedalboard delivers a lightweight, torsion-resistant, and durable build fully prepared to handle the demands of gigging and travel. The flat, weld-free surface optimizes this pedalboard for total pedal coverage — music to the ears of Sweetwater gearheads who strive to utilize every millimeter of available pedalboard space. Likewise, the slotted design pattern makes mounting your pedals and organizing your pedalboard a cinch, while the undercarriage tackles cable management and can accommodate virtually any standard power block. Lastly, the Tres 3.0 comes stock with mounting holes and a patchbay slot, perfect for easily upgrading your rig with a RockBoard LED Light or MOD. Lightweight, sturdy, durable, spacious, and customizable — the Tres 3.0 pedalboard delivers without compromise
RockBoard by Warwick MOD 5 Pedalboard Patchbay
Built to streamline even the most complex pedalboard configurations, the RockBoard by Warwick MOD 5 consolidates all your connections into one sleek, centralized hub. It houses six selectable stereo cabinet simulations powered by impulse responses (IRs) and an active DI box, allowing you to preserve your meticulously crafted tone regardless of the available backline. The integrated patchbay includes three 1/4-inch TRS thru jacks, an XLR DI output jack, a 1/4-inch parallel TS output jack, and a 1/4-inch parallel IR/DI TS input jack. It also brandishes a 1/8-inch stereo headphone output with adjustable volume and a micro-USB port for loading custom IRs. Furthermore, thanks to its TRS thru connections, setting up 4-cable-method configurations is effortless, enabling you to route certain pedals to your amp's front input while others run through the effects loop. Designed to keep your signal chain clean and organized, the MOD 5 minimizes cable clutter and significantly reduces setup time. And while it's built to integrate seamlessly into RockBoard pedalboards via the MOD slot, it's also fully compatible with a wide range of third-party boards. For added flexibility, the detachable front plate allows for mounting on top of or beneath your board. Whether you're building a new rig or simply elevating an existing one, the RockBoard by Warwick MOD 5 ensures your signature tone travels with you, intact, organized, and ready for any stage.
RockBoard Power Block The RockBoard Power Block is a compact multi-power supply for effects pedals and offers 10 power slots for the parallel power supply of up to 10 pedals. With a total of 1,200 mA for the eight 9V connections and a total of 800 mA for the two 18V connections, modern effects pedal setups can be easily supplied with power. The scope of delivery includes 10 connection cables and an 18V DC power supply (2,000 mA) with exchangeable multi-regional plug adapters.
RockBoard by Warwick Tres 3.0 Base Plate Upgrade your RockBoard pedalboard with the Base Plate — a multipurpose board management solution for protecting, organizing, and storing your cables, power supplies, surplus pedals, and other hardware. The Base Plate’s flat, lightweight design means that it is easily attached to its corresponding board via the included hardware and ensures your setup remains portable and travel friendly.










