Beginner Big Model Rocket Kit
17 Hours
8
0
$17.00
Description
Condition
Payment Types Accepted
Venmo
ZelleEntry Level model rocket kit for a 2 feet 3 inches tall rocket. (Compare to Estes' original Big Bertha.) This beginner kit can be completed by a 9 year old in under an hour using a hot glue gun. Video instructions guide you through the build. Many body tube color choices.
Difficulty: Beginner
Age: 9 years old and up
What you need: hot glue gun, glue sticks, scissors, pencil, clear tape
Instructions: YouTube video LINK
Not included for launch: launch pad & controller, engines, wadding
Recommended engines: Estes B6-4 or C6-5
Please Note:
The finished rocket will have minor flaws. The body tube is made of poster board and has a seam down the length and may have blemishes. The fins are made of foam board and the cut edge is not smooth. The rocket will look homemade--not as polished as an Estes kit. The trade off is that it can be made in an hour by a 9 or 10 year old without having to wait for glue to dry.
Please Note:
The nose cone is 3D printed and should not be left in a hot place, such as a hot car. It may get soft and lose its shape.
Color choices:
Body Tube
primary colors: red, blue, purple, black, yellow
neon colors: orange, green, yellow, pink
Nose Cone
black, white, grey, or red
Fins
black, white
YouTube instructions: https://www.youtube.com/watch?v=NPmMNg8xFGM&list=PLSI241uqHM5K_ZnSknFCqquy9hB0HNFuT
You Might Also Like
Beginner Big Model Rocket Kit
17 Hours
8
0
$17.00
Description
Condition
Payment Types Accepted
VenmoZelleEntry Level model rocket kit for a 2 feet 3 inches tall rocket. (Compare to Estes' original Big Bertha.) This beginner kit can be completed by a 9 year old in under an hour using a hot glue gun. Video instructions guide you through the build. Many body tube color choices.
Difficulty: Beginner
Age: 9 years old and up
What you need: hot glue gun, glue sticks, scissors, pencil, clear tape
Instructions: YouTube video LINK
Not included for launch: launch pad & controller, engines, wadding
Recommended engines: Estes B6-4 or C6-5
Please Note:
The finished rocket will have minor flaws. The body tube is made of poster board and has a seam down the length and may have blemishes. The fins are made of foam board and the cut edge is not smooth. The rocket will look homemade--not as polished as an Estes kit. The trade off is that it can be made in an hour by a 9 or 10 year old without having to wait for glue to dry.
Please Note:
The nose cone is 3D printed and should not be left in a hot place, such as a hot car. It may get soft and lose its shape.
Color choices:
Body Tube
primary colors: red, blue, purple, black, yellow
neon colors: orange, green, yellow, pink
Nose Cone
black, white, grey, or red
Fins
black, white
YouTube instructions: https://www.youtube.com/watch?v=NPmMNg8xFGM&list=PLSI241uqHM5K_ZnSknFCqquy9hB0HNFuT
You Might Also Like
