we purchase this new it has work well for us it has 13,260.4 hours on it we are now sell a bunch of equipment that we have been gather up for years if you looking for any equipment give me a call I bet I have it to sell. Will consider all offers

Key Specifications (Typical Configuration)

Engine (Tier 4 Final/Stage V variant, most common in recent data):

• Model: Cat C13

• Maximum Gross Power: 317 kW (425 hp) @ 1,700 rpm (SAE J1995); 313 kW (420 hp) (ISO 14396)

• Maximum Net Power: 288 kW (386 hp) @ 1,700 rpm (ISO 9249 / SAE J1349)

• Peak Gross Torque: ~2,206 N·m (1,627 lbf-ft) @ 1,200 rpm

• Displacement: 12.5 L (763 in³)

• Bore x Stroke: 130 x 157 mm (5.12 x 6.18 in)

• Emissions: Meets U.S. EPA Tier 4 Final / EU Stage V (or equivalents depending on region; Tier 3/Stage IIIA options available in some markets).

Weights & Capacities:

• Operating Weight: ~30,090 kg (66,337 lb) — based on Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, 5.4 m³ (7.1 yd³) general purpose bucket with BOCE (Bolt-On Cutting Edge), etc.

• Bucket Capacities: 4.2–12.2 m³ (5.25–16.0 yd³), with Performance Series buckets for better fill factors and retention.

Operating Specifications:

• Breakout Force: ~224 kN (50,357 lbf)

• Static Tipping Load (Full 40° Turn): ~19,565 kg (43,133 lb) with tire deflection; ~20,796 kg (45,847 lb) no tire deflection.

• Hydraulic System: Variable displacement piston pump; max pump output ~449 L/min (119 gal/min) @ 2,250 rpm; max pressure ~34,300 kPa (4,975 psi). Optional 3rd function flow ~240 L/min (63 gal/min). Cycle times (rated payload): Raise ~5.3 s, Dump ~1.7 s, Lower ~3.1 s, Total ~10.1 s.

Transmission & Speeds (with lock-up clutch torque converter):

• Forward: 1st ~6.9 km/h (4.3 mph), 2nd ~13.3 km/h (8.3 mph), 3rd ~23.5 km/h (14.6 mph), 4th ~39.5 km/h (24.5 mph)

• Reverse: Similar ranges up to ~39.5 km/h.

Service Refill Capacities (approximate):

• Fuel Tank: 426 L (112.5 gal)

• DEF Tank: 21 L (5.5 gal)

• Cooling System: ~53 L (14 gal)

• Crankcase: 37 L (9.8 gal)

• Transmission: ~77 L (20.3 gal)

• Differentials/Final Drives (each): 84 L (22 gal)

• Hydraulic Tank: 153 L (40 gal)

Dimensions (approximate, standard lift with 5.4 m³ bucket; all dimensions vary slightly with tires/buckets):

• Height to Top of Hood: ~3,110 mm (10’3”)

• Height to Top of ROPS: ~3,813 mm (12’7”)

• Ground Clearance: ~453 mm (1’5”)

• Wheelbase: 3,800 mm (12’6”)

• Overall Length (without bucket): ~7,964 mm (26’2”); Shipping length (with bucket): ~9,493 mm (31’2”)

• Hinge Pin Height at Max Lift: ~4,539 mm (14’10”)

• Dump Clearance at Max Lift & 45°: ~3,273 mm (10’9”)

• Reach at Max Lift & 45°: ~1,481 mm (4’11”)

• Width Over Tires: ~3,265–3,296 mm (10’9”–10’10”)

• Tread Width: 2,440 mm (8’0”)

High-lift configuration increases hinge pin height and reach.

Other Features:

• Axles: Front fixed, rear oscillating ±13°; max single-wheel rise/fall ~549 mm (1’10”).

• Brakes: Meet ISO 3450:2011.

• Cab: ROPS/FOPS (ISO 3471/3449 Level II); low sound levels (~72 dB(A) operator).

• Tires: Standard 29.5R25 L4; various options affect dimensions/weights.