Infinity Reference 7005A 5 Channel Amplifier
4 Days
116
3
$400.00
Description
Condition
Payment Types Accepted
Venmo
PayPalBrand new in box. I learned that I only need a 4 channel for my application so decided this is too much amp for me.
Infinity's Reference 7005A 5-channel amplifier provides a full system solutions without breaking a sweat, and it'll look good doing it. It delivers 50-Watts RMS to each of the front and rear speakers, and a ground pounding 500-Watts RMS to the subwoofer channel — a much better balance of "speaker-to-sub" power than most of conventional 5-channel amplifiers on the market. For higher output, you can bridge the amp to 3-channel mode and power your front speakers with 140-Watts per channel, while still delivering 500-Watts to the subwoofer channel. Speaker-level inputs allow the Reference 7005A to work in almost any system, even if you're keeping your factory radio. Separate high-pass and low-pass crossovers on the front and rear channels and dedicated low-pass crossover, bass boost, and phase switch for the subwoofer channel provides an incredible amount of control and tuning capability. The Reference 7005A is truly a total system solution in one easy to install chassis.
General Specifications: 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels low-pass filter (32-320 Hz, 12 dB/octave) on subwoofer channel bass boost on subwoofer channel (0-12dB at 45Hz) phase switch on subwoofer channel (0, 180 degrees) preamp and speaker-level inputs fuse rating 30A x 3 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier WxHxD=360mm x 55.5mm x 180mm WxHxD=14-3/16” x 2-3/16" x7-1/8”
You Might Also Like
Infinity Reference 7005A 5 Channel Amplifier
4 Days
116
3
$400.00
Description
Condition
Payment Types Accepted
VenmoPayPalBrand new in box. I learned that I only need a 4 channel for my application so decided this is too much amp for me.
Infinity's Reference 7005A 5-channel amplifier provides a full system solutions without breaking a sweat, and it'll look good doing it. It delivers 50-Watts RMS to each of the front and rear speakers, and a ground pounding 500-Watts RMS to the subwoofer channel — a much better balance of "speaker-to-sub" power than most of conventional 5-channel amplifiers on the market. For higher output, you can bridge the amp to 3-channel mode and power your front speakers with 140-Watts per channel, while still delivering 500-Watts to the subwoofer channel. Speaker-level inputs allow the Reference 7005A to work in almost any system, even if you're keeping your factory radio. Separate high-pass and low-pass crossovers on the front and rear channels and dedicated low-pass crossover, bass boost, and phase switch for the subwoofer channel provides an incredible amount of control and tuning capability. The Reference 7005A is truly a total system solution in one easy to install chassis.
General Specifications: 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels low-pass filter (32-320 Hz, 12 dB/octave) on subwoofer channel bass boost on subwoofer channel (0-12dB at 45Hz) phase switch on subwoofer channel (0, 180 degrees) preamp and speaker-level inputs fuse rating 30A x 3 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier WxHxD=360mm x 55.5mm x 180mm WxHxD=14-3/16” x 2-3/16" x7-1/8”
You Might Also Like
