The Wood Connections Flower Pot with Circle Flowers of 3. There are 13 Wood Pieces. The completed project is 12" wide x 19" high. Pot is 1 1/2” thick x 8 1/2” high x 9” wide. The width of the decorative rim is approximately 2” x 9 1/2” x 1/4” the bottom edge is scalloped. There are 3 - 1 1/2” thick circles with the following diameter: 1 - 4 1/4” in diameter, 1 - 5 1/4” in diameter, 1 - 5 3/4” in diameter. 3 smaller circles 3” x 1/4” decorative wood like the rim. 3 pegs 1 - 7” long, 1 - 3 7/8” long, 1 - 3 1/4” long. 2 circles 1 - 5 1/8” wide x 1/4” thick, 1- 4” wide x 1/4” thick. I do not have the directions. You will need paper, paint and glue to complete your pot of three Spring flowers. I have two wood sets of this design. Price is for 1 set.

First 4 pictures show the finished project. It is only for ideas to complete your project.

See the following for some of the instructions: Paint the bottom layers and middle layers the same colors, and the top bead board layer white. Next, add a second coat of different color to the middle layers, then sand the edges, to get the distressed look with the other color peeking through (see last picture). Next, trace the circles and cut the paper for the bottom layer and cut and measure paper strips for the bead board layer. Take wood glue (not included) to adhere paper to wood. Use the wood glue to put flowers together. For the flower pot, cover with your choice of paper. Take a vinyl sticker of your liking and place it on the bottom of pot. Paint the bead board trim white then distress it. Add some baker's twine and ribbon to it. This pot will bring Spring inside! After Winter, you will be ready for some bright and colorful things inside and out. Good luck with your Flower Pot project.