1. In addition to shelf wear, there are asymmetrical ejection mark SCRATCHES on three of the bodies (two scratches per body on either side of ONE of the pin holes, so one of the scratches is on the body front): Orange, Dark Purple, and Bright Light Blue/Light Royal Blue. It's difficult to capture in pictures, especially with the Orange and Light Blue, and even more difficult to make out on the front side.2. The brown body and legs are NOT the same color: the body is Reddish Brown, the legs are classic Brown.

2. The 3rd party legs do NOT have friction pins: they have old-style pins that are much looser than modern friction pins. They're not so loose that they can't hold a body tilt when placed on studs; but if not used for a static display (subjected to play), they could easily get that way.

3. I have no control over Lego printing. Assume Lego prints are angled/crooked. 3rd party printing isn't perfect: for example, you can see that the vents in the middle of the purple print are a little off; but unlike Lego prints, the prints aren't angled--the pictures of 3rd party prints are representative of all lots.

4. These parts are 100% injection molded, but MANY parts are NON-LEGO. Bodies and domes are 100% printed, no decals. You get what's in the first picture: 11 domes, 10 bodies, 20 legs (10 pairs of legs). Note there are multiple lots, so prints and defects may vary slightly (especially Lego prints).

5. All domes are Lego: 553pb001 (R4-G9, copper), 553pb007 (R4-P44, dark green), 553pb010 (R2-Q2, flat silver with b&w), 553pb018 (R2-X2, white with dark green), 553pb022 (black Imperial, trans-clear), 553pb025 (R3-M3, trans-brown), 553pb026 (trans-brown with orange), 553pb027 (trans-brown with dark brown), 553pb044 (dark red), 553pb054 (QT-KT, dark pink), 553pb056 (white with lime)

6. The White, Reddish Brown, Dark Green, Red, and Dark Red bodies are Lego: 30361pb005 (R4-P44, white w/green), 30361pb008 (R7-D4, reddish brown), 30361pb029 (R2-X2, dark green), 30361pb051 (L3-GO, red), 30361cpb055 (R7-A7, dark red)

7. The White, Dark Green, Yellow, and Dark Red legs are Lego.

8. The Orange (R7-F5 ish), Yellow (R3-Z3 ish), Dark Purple (R4-M6 ish), BLB/Light Royal Blue (R2-T0 ish), and Bright Pink bodies have 3rd party/NON-LEGO prints (the yellow body itself is a Lego-brand part, just the print is non-Lego). Please note that any grayish looking parts of prints are just that: gray. There are NO metallic inks used in the 3rd party prints.

9. The Brown, Red, Orange, Dark Purple, BLB/Bright Royal Blue, Bright Pink legs are all 3rd party/NON-LEGO.

Aside from how I sourced the parts, do not hesitate to ask me questions!