RC Boat and Hardware Sale – Exiting the Hobby
1 Day
10
0
$1,650.00
Description
Condition
Payment Types Accepted
PayPalFor sale is all my RC boat hardware and my last build. The boat is a 36” OSE V hull with a full carbon inlay (hull and canopy). It comes with a custom stand and is equipped with a Lehner 2260 8 wind (~$480 list), and MBP collet and custom Speedmaster rudder assembly. The boat also comes with full frontal floatation and small brushless water pump to keep water flowing when the hull is not moving. Two 5100 mAh 80c RoaringTop lipos mounted on adjustable HPR mounts are included. This boat has been briefly test ran several times and I was able to get it up to 85mph on 12S before I had to move away from my lake. The esc is a 300A Hifei with no data logging. As you can see in the pictures there are two small spots that will need filling/painting, one on the canopy corner and one on the bow tip, beyond that everything is in great condition and ready to roll. Also included in this sale are all my props and hardware items. There are 36 various propellers with drive dogs and bullet nuts included. Notably there are three pairs of Andy Brown sharpened/balanced props: (2) X447 L&R, and one X442 L&R. There are two sets from KBB X450 L&R three blade, and X447 L&R. There is a pair of 4518 L&R from The Prop Shop, and an OSE X445. The remaining props are either in their stock condition or have been roughly sharpened and balanced by me (I would strongly recommend having any of these professionally sharpened and balanced). There are two 180A non-data logging Hifei ESC’s which were used in a Catamaran for 1 season (there is some wire insulation tears on these ESC’s that will need to be shrink wrapped). There are two car esc’s included, a New Castle Creations Mamba XL 8S, and a new Trackstar 34V 8S ESC with programming card (not shown). In the hardware organizer there are (4) 8mm MBP collets and (3) 5mm MBP collets and a large assortment of other collets, there is a large assortment of needle bearings, plumbing supplies, servo arms, hatch locks, and ball ends. The Leopard 4092 and mount are new and have never been used. I’m hoping the rest of the items in the pictures are self-explanatory but feel free to contact me with any questions.
Extra Items added after originally listing this sale which are included are: (2) new Turnigy Marine 180 A ESC’s (one is modified with an extra cap pack and connectors), an additional Futaba 334SBS receiver, A Futaba 6YA431 gyro, (2) Traxxas Link TQI receivers (pn:6518), a Spectrum MR200 receiver, a Spectrum SR300 receiver and a Spectrum SPM9465 DSMX satellite receiver. Thanks, and good luck.
You Might Also Like
RC Boat and Hardware Sale – Exiting the Hobby
1 Day
10
0
$1,650.00
Description
Condition
Payment Types Accepted
PayPalFor sale is all my RC boat hardware and my last build. The boat is a 36” OSE V hull with a full carbon inlay (hull and canopy). It comes with a custom stand and is equipped with a Lehner 2260 8 wind (~$480 list), and MBP collet and custom Speedmaster rudder assembly. The boat also comes with full frontal floatation and small brushless water pump to keep water flowing when the hull is not moving. Two 5100 mAh 80c RoaringTop lipos mounted on adjustable HPR mounts are included. This boat has been briefly test ran several times and I was able to get it up to 85mph on 12S before I had to move away from my lake. The esc is a 300A Hifei with no data logging. As you can see in the pictures there are two small spots that will need filling/painting, one on the canopy corner and one on the bow tip, beyond that everything is in great condition and ready to roll. Also included in this sale are all my props and hardware items. There are 36 various propellers with drive dogs and bullet nuts included. Notably there are three pairs of Andy Brown sharpened/balanced props: (2) X447 L&R, and one X442 L&R. There are two sets from KBB X450 L&R three blade, and X447 L&R. There is a pair of 4518 L&R from The Prop Shop, and an OSE X445. The remaining props are either in their stock condition or have been roughly sharpened and balanced by me (I would strongly recommend having any of these professionally sharpened and balanced). There are two 180A non-data logging Hifei ESC’s which were used in a Catamaran for 1 season (there is some wire insulation tears on these ESC’s that will need to be shrink wrapped). There are two car esc’s included, a New Castle Creations Mamba XL 8S, and a new Trackstar 34V 8S ESC with programming card (not shown). In the hardware organizer there are (4) 8mm MBP collets and (3) 5mm MBP collets and a large assortment of other collets, there is a large assortment of needle bearings, plumbing supplies, servo arms, hatch locks, and ball ends. The Leopard 4092 and mount are new and have never been used. I’m hoping the rest of the items in the pictures are self-explanatory but feel free to contact me with any questions.
Extra Items added after originally listing this sale which are included are: (2) new Turnigy Marine 180 A ESC’s (one is modified with an extra cap pack and connectors), an additional Futaba 334SBS receiver, A Futaba 6YA431 gyro, (2) Traxxas Link TQI receivers (pn:6518), a Spectrum MR200 receiver, a Spectrum SR300 receiver and a Spectrum SPM9465 DSMX satellite receiver. Thanks, and good luck.
You Might Also Like
