A great sounding pair of Bowers and Wilkins DM1400 speakers. Each one has two 6 inch woofers with rubber surrounds and a 1 inch soft dome tweeter. I really like how balanced and full these are. I can hook up a receiver to listen in person. All drivers function correctly. These are sequential serial numbers and still have the tag from when they were sold new in NYC. The paint over the original hardwood black ash veneer has peeled in quite a few areas so they are not the most cosmetically pleasing pair, but the sound is spectacular.

I'm located in Cedar City and cannot deliver to St. George or Northern Utah.

Tech specs:

Solid wood (walnut, rosewood, natural oak, or black ash) veneer over thick chipboard construction

Sealed acoustic suspension enclosure with a 28L internal volume, internally braced, two-way speakers

Two 6” woofers with rubber surrounds and die-cast frames - 150 mm Bextrene cone, heavily damped with PVA compounds, 26 mm diameter high-temperature voice coil - BW150/14

One 1” soft dome tweeter - 26mm special polyamide, laser-optimized - TZ26

Both electronically corrected for minimum inter-unit time delay

Frequency Response = 80 Hz - 20 kHz +/- 2 dB at centre of the listening window at 2 meters

-6 dB at 45 Hz, optimized to give essentially flat third octave response down to 35 Hz with asymmetrical room loading

Vertical Dispersion = +/- 1.5 dB over a 10 degree arc, 20 Hz to 10 kHz

Horizontal Dispersion = +0 -2 dB over a 40 degree arc, 20 Hz to 10 kHz

Crossover = true fourth-order acoustic, butterworth-squared characteristic, computer-optimised to greater than -40 dB reference 0 dB level, giving 24 dB per octave attenuation in the stop band - Bass driver first order difference filter

Crossover Frequencies = 500 Hz and 3 kHz

Impedance = 8 Ω nominal throughout entire operating range

Sensitivity = 86 dB, 1 watt, 1 meter

Power Handling = minimum of 30 watts into 8 Ω, no maximum upper limit because of electronic overload protection device

Dimensions = 22” H (31 ¼” H with original stands) x 10” D x 11 ½” W

Weight = 41.8 lbs each

Made in England (enclosures and drivers)