Model: Dell Poweredge R730 Server - 2U Rackmount Server

CPU: 2x Intel Xeon E5-2640 V4's - Each one has 10 Cores/20 Threads running between 2.4GHz-3.4GHz | 20 Cores/40 Threads Total

RAM: 128GB Registered ECC DDR4

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 16x Front 2.5" Hot-Swap SAS/SATA Bays (2x Trays Incl.)

Storage Controller: Dell PERC H730 Dual Mode Controller - Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

Remote Management: iDRAC 8 Enterprise

Networking: 4x 1GbE RJ-45 Ethernet ports

‎

Rails: Available for $70, with purchase of this server

Bezel: Available for $10

Power: Dual Hot-Swap 750W Redundant PSUs

PCI-E Cards: None

Available Upgrades: Storage, Networking, PSUs, Rails, Bezel

Additional Notes: This server can take up to 2 dual slot GPUs, though you'll need 1100W PSUs and the GPU power cables to do so. Both are available for purchase.

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared
• All available firmware update shave been applied
• The RAM has been replaced with tested modules from our inventory
• The CPUs have been replaced with higher performance models (2x E5-2630 V3 --> 2x E5-2640 V4)
• The CPUs have Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com