Pioneer SX-650 Receiver
3 Hours
20
0
$150.00
Description
Condition
Payment Types Accepted
Venmo
ZelleThis vintage Pioneer receiver dates from approximately 1976–1978. It works and sounds good. Pioneer veneers from this era do not tend to hold up well, so the veneer should be replaced. The unit is competitively priced. Feel free to compare similar listings on eBay. Only selling because I’m downsizing.
Specifications
Tuning range: FM, MW
Power output: 35 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.3%
Damping factor: 30
Input sensitivity: 7mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 70dB (MM), 90dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω (minimum)
Semiconductors: 1 x FET, 9 x IC, 21 x transistors, 29 x diodes
Dimensions: 480 x 149 x 371mm
Weight: 13.1kg
You Might Also Like
Pioneer SX-650 Receiver
3 Hours
20
0
$150.00
Description
Condition
Payment Types Accepted
VenmoZelleThis vintage Pioneer receiver dates from approximately 1976–1978. It works and sounds good. Pioneer veneers from this era do not tend to hold up well, so the veneer should be replaced. The unit is competitively priced. Feel free to compare similar listings on eBay. Only selling because I’m downsizing.
Specifications
Tuning range: FM, MW
Power output: 35 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.3%
Damping factor: 30
Input sensitivity: 7mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 70dB (MM), 90dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω (minimum)
Semiconductors: 1 x FET, 9 x IC, 21 x transistors, 29 x diodes
Dimensions: 480 x 149 x 371mm
Weight: 13.1kg
