Speed boat equipped with a high-performancePontiac 400 engine
14 Hours
38
2
$5,900.00
Description
Condition
Payment Types Accepted
VenmoA 1969 SK boat equipped with a Pontiac 400 engine is a high-performance planing hull speed boat powered by a large-displacement American muscle car engine. The boat's specific design features and the engine's power output vary based on custom build specifications, as "SK boat" often refers to a style of amateur-built or small-manufacturer kit boat designed for speed.
1969 SK Boat (General Description)
- Hull Type: Typically a planing hull, designed to lift out of the water at high speeds to reduce drag.
- Construction: Often fiberglass or wood (plywood/epoxy composite), especially if built from a kit or plans.
- Dimensions: Generally in the range of 14 to 20 feet in length, with a relatively narrow beam compared to modern pleasure craft to maximize speed potential.
- Configuration: Usually an open cockpit design, often with a V-drive or jet drive system for power delivery, which places the engine forward in the boat.
- Intended Use: Designed for high-speed recreational use, such as water skiing (hence "SK" for ski boat) or racing.
1969 Pontiac 400 Engine (Technical Specifications)
The Pontiac 400 cubic-inch (6.6-liter) V8 engine was a robust, cast-iron block engine known for its substantial low-end torque. Several versions were available in 1969, with horsepower ratings varying significantly:
- Displacement: 400 CID (6.6L).
- Bore and Stroke: 4.120 inches x 3.750 inches.
- Block & Heads: Cast iron block with cast iron D-port cylinder heads.
- Valvetrain: Overhead valves with hydraulic valve lifters.
- Carburetion: Typically equipped with a Rochester Quadrajet four-barrel carburetor in high-performance configurations.
You Might Also Like
Speed boat equipped with a high-performancePontiac 400 engine
14 Hours
38
2
$5,900.00
Description
Condition
Payment Types Accepted
VenmoA 1969 SK boat equipped with a Pontiac 400 engine is a high-performance planing hull speed boat powered by a large-displacement American muscle car engine. The boat's specific design features and the engine's power output vary based on custom build specifications, as "SK boat" often refers to a style of amateur-built or small-manufacturer kit boat designed for speed.
1969 SK Boat (General Description)
- Hull Type: Typically a planing hull, designed to lift out of the water at high speeds to reduce drag.
- Construction: Often fiberglass or wood (plywood/epoxy composite), especially if built from a kit or plans.
- Dimensions: Generally in the range of 14 to 20 feet in length, with a relatively narrow beam compared to modern pleasure craft to maximize speed potential.
- Configuration: Usually an open cockpit design, often with a V-drive or jet drive system for power delivery, which places the engine forward in the boat.
- Intended Use: Designed for high-speed recreational use, such as water skiing (hence "SK" for ski boat) or racing.
1969 Pontiac 400 Engine (Technical Specifications)
The Pontiac 400 cubic-inch (6.6-liter) V8 engine was a robust, cast-iron block engine known for its substantial low-end torque. Several versions were available in 1969, with horsepower ratings varying significantly:
- Displacement: 400 CID (6.6L).
- Bore and Stroke: 4.120 inches x 3.750 inches.
- Block & Heads: Cast iron block with cast iron D-port cylinder heads.
- Valvetrain: Overhead valves with hydraulic valve lifters.
- Carburetion: Typically equipped with a Rochester Quadrajet four-barrel carburetor in high-performance configurations.
You Might Also Like
