Model: Dell Poweredge R730XD - 2U Rackmount Server

CPU: 2x Intel Xeon E5-2680 V4's - Each one has 14 Cores/28 Threads running between 2.4GHz-3.3GHz | 28 Cores/56 Threads Total

RAM: 96GB Registered ECC DDR4

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 12x Front 3.5" & 2x Rear 2.5" Hot-Swap SAS/SATA Bays (All Trays Incl.)

Storage Controller: Dell PERC H730 Dual Mode Controller - Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

Remote Management: iDRAC 8 Express

Networking: 4x RJ-45 Ethernet Ports [2x10G|2x1G]

‎

Rails: Available for $70, with purchase of this server

Bezel: Available for $10

Power: Dual Hot-Swap Redundant 1100W PSUs

PCI-E Cards: None

Available Upgrades: Storage, Networking, Rails, Bezel, GPU Power cables (8+6 pin)

Additional Notes: This is an XD Model with the optional Flex Bay, so it has 12x 3.5" bays in the front with an additional 2x 2.5" bays in the rear

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared
• All available firmware updates have been applied
• The RAM has been replaced with tested modules from our inventory
• The CPUs have been replaced with higher performance models
• The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied
• The NDC has been replaced with a higher performance model with 10G ports

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com