6ft Linear Non-Hardened Solid Steel Shaft Bar
11 Hours
53
0
$110.00
Description
Condition
Payment Types Accepted
VenmoNew, located in Nephi
Brand THOMSON Manufacturer Part Number 1 SOFT CTL 72 Shaft TypeNon-Hardened Solid Shaft Nominal Diameter 1 in Diameter Tolerance0.997 in to 1 in Length72 in Material Steel Series LinearRace Type Solid End Type Plain Ends For Use WithBall Bushing Bearing Tolerance Class Soft Roughness 8 uin Ra Diameter Tolerance Minimum0.997 in Diameter Tolerance Maximum 1 in Weight Per Inch 0.222 lbUNSPSC23153030 Country of OriginUSA (subject to change) Product Description Solid linear shafts are hardened or non-hardened and available in pre-cut inch or metric sizes. Hardened shafts have durable outer layers that provide precise tolerances for roundness, hardness, straightness, and accurate surface finishes. They are suitable for moderate-to-heavy loads that use ball bearings. Applications for non-hardened shafts include light loads that use plain linear bearings and require less precise tolerances than hardened shafts.
You Might Also Like
6ft Linear Non-Hardened Solid Steel Shaft Bar
11 Hours
53
0
$110.00
Description
Condition
Payment Types Accepted
VenmoNew, located in Nephi
Brand THOMSON Manufacturer Part Number 1 SOFT CTL 72 Shaft TypeNon-Hardened Solid Shaft Nominal Diameter 1 in Diameter Tolerance0.997 in to 1 in Length72 in Material Steel Series LinearRace Type Solid End Type Plain Ends For Use WithBall Bushing Bearing Tolerance Class Soft Roughness 8 uin Ra Diameter Tolerance Minimum0.997 in Diameter Tolerance Maximum 1 in Weight Per Inch 0.222 lbUNSPSC23153030 Country of OriginUSA (subject to change) Product Description Solid linear shafts are hardened or non-hardened and available in pre-cut inch or metric sizes. Hardened shafts have durable outer layers that provide precise tolerances for roundness, hardness, straightness, and accurate surface finishes. They are suitable for moderate-to-heavy loads that use ball bearings. Applications for non-hardened shafts include light loads that use plain linear bearings and require less precise tolerances than hardened shafts.
You Might Also Like
