Model: Dell Poweredge R730 - 2U Rackmount Server

CPU: 1x Intel Xeon E5-2630 V4 - 10 Cores/20 Threads running between 2.2GHz-3.1GHz | Second CPU Socket unoccupied

RAM: 32GB Registered ECC DDR4

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 8x Front 2.5" Hot-Swap SAS/SATA Bays (2x Trays Incl.)

Storage Controller: Dell PERC H330 Dual Mode Controller - Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

Remote Management: iDRAC 8 Express

Networking: 4x 1GbE RJ-45 Ethernet Ports

‎

Rails: None

Bezel: None

Power: Dual Hot-Swap 495W Redundant PSUs

PCI-E Cards: None

Available Upgrades: Storage, Networking, PSUs

Additional Notes: This server suffered some shipping damage to the left ear, the ear and the mounting holes have been snapped off.

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared
• All available firmware updates have been applied
• The RAM has been replaced with tested modules from our inventory
• The CPU has been replaced with a higher performance model
• The CPU and Heatsink have been thoroughly cleaned, and new Arctic thermal paste has been applied
• The server has been inspected for damage, the only damage found was the left ear, as noted above

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com