Payment Types Accepted

Cash

Venmo

CashApp

Zelle

Edelbrock 7123 Performer RPM II Intake Manifold

Great manifold in good shape, just needs a good cleaning & ready to go. There is absolutely nothing wrong with this unit, I had a new motor build and purchased a new manifold strictly for aesthetic reasons. Sale includes upper and lower manifolds, no hardware or accessories. You’ll need a bolt kit and gaskets – both easily attainable. Great deal for about half the cost of new!

Manufactures info below

Edelbrock part #7123 Performer 5.0 RPM II intake manifold for 1986-95 5.0L Mustang engines has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range and is ideally suited for streetand strip applications. This manifold consists of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. Our 70mm throttle body is recommended (75mm will require port matching). 1994-95 Mustang engines require Throttle Body Adapter #38353 and Adapter Kit #8025.

Part Type Engine Intake Manifold

Manufacturer Edelbrock Application

Application Specific

Series Performer RPM

Material Aluminum

Finish Satin

Vehicle Model Ford

RPM Range 1500-6500 RPM

Application Summary Ford:Small-Block Windsor:302 (5.0L)

Installation Notes

• Recommended intake gasket: Edelbrock # 7220
• Air valve location is 0.30" higher and 0.50" forward from stock
• Port exit dimensions: 1.16" x 2.0"
• Recommended cams: Ford SVO X-303 or Z-303.
• Overall height: 11.13"
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
• Single Or Dual Plane Type - Dual