Model: Supermicro X10SRi-F Motherboard | Supermicro CSE-836 Chassis | Supermicro BPN-SAS3-836EL1 Backplane

CPU: Intel Xeon E5-2630L V3 - 8 Cores/16 Threads running between 1.8GHz-2.9GHz

RAM: 64GB Registered ECC DDR4 (4x16GB)

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Primary Storage System: 16x Front 3.5" Hot-Swap SAS/SATA Bays (All 16x Trays Incl.)

Secondary Storage System: 2x Rear 2.5" SATA Bays (Both Trays Incl.)

Storage Controller: SAS3008 based SAS/SATA Compatible IT Mode HBA

Remote Management: IPMI 2.0

Networking: 2x Gigabit RJ-45 Ethernet Ports (Intel i350)

‎

Rails: Available for $20 with purchase of this server

Bezel: N/A

Power: Dual 1000W Hot-Swap Redundant PSUs

PCI-E Cards: HBA, external SAS connector

Available Upgrades: Storage, Networking

Additional Notes: This server has a low TDP Xeon CPU installed, denoted by the L in the CPU's model name

Work Done:

• BIOS and IPMI have been reset to factory defaults
• The CPU has been replaced with a faster and more power efficient model (Xeon E5-1620 V3 @140W TDP ---> Xeon E5-2630L V3 @55W TDP)
• The RAM has been replaced with tested modules from our inventory
• The previous Hardware RAID Controller has been replaced with an IT Mode HBA

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com