Genuine Caterpillar (CAT) Heavy-Duty Mechanical Shear / Grapple Attachment – 80mm Pin Class
20 Hours
11
1
$6,300.00
Rolling
Note: KSL, its service providers, and the seller receive data from this message. See our Privacy Notice and TOU for details.
Description
Condition
Payment Types Accepted
ZelleSelling a genuine Caterpillar heavy-duty mechanical shear/demolition grapple attachment. Built with thick, massive high-tensile steel, this structure is designed for heavy-duty scrap handling, sorting, or demolition work. Features the unmistakable factory-stamped, raised CAT logo welded directly to the main arm casing. This attachment has been meticulously measured to ensure a flawless fit for your machine or quick coupler setup. Verified Specifications & Physical Measurements: Pin Diameter: 80mm Class (Measures clean between 3-1/8” and 3-1/4”) Inside Ear Spacing (Stick Width): 12” inside-to-inside clearance Lower Pin Spread: 24” Upper Pin Spread: 34” Condition: Solid structural condition. Normal surface rust/oxidation from outdoor storage. All bores are round, straight, and ready to work. Unpainted, raw original steel so you can see exactly what you are buying. Compatibility & Cross-Reference Guide: With an 80mm pin and 12” stick width, this attachment is built for a massive range of 20-ton to 25-ton mid-sized excavators. It will pin directly onto, or easily adapt to, the following machine lines: Caterpillar: 320, 320B, 320C, 320D, 320E, 320F, 321, 322, 323, and 325 series running standard 80mm pins. John Deere: 200LC, 210G, 225, 230LCR, 240D, 245G, 250G Hitachi: EX200, EX220, ZX200, ZX210, ZX225, ZX240, ZX250 Komatsu: PC200, PC210, PC220, PC228, PC240 (Standard 12.25” ears—mounts cleanly using basic spacing shims). Other 80mm Makes: Fits similar 80mm pin-class setups from Kobelco (SK210/250), Case (CX210), Link-Belt, and Doosan. Buyer Note on Coupler Fitment: If your machine is running a standard hydraulic standard or progressive Pin-Grabber Quick Coupler (like a Geith, Miller, or original CAT coupler) sized for 80mm pins, this attachment will be picked up automatically. The variable slide on your pin-grabber will safely lock onto the 24” to 34” pin spread arrangement easily.
You Might Also Like
Genuine Caterpillar (CAT) Heavy-Duty Mechanical Shear / Grapple Attachment – 80mm Pin Class
20 Hours
11
1
$6,300.00
Rolling
Note: KSL, its service providers, and the seller receive data from this message. See our Privacy Notice and TOU for details.
Description
Condition
Payment Types Accepted
ZelleSelling a genuine Caterpillar heavy-duty mechanical shear/demolition grapple attachment. Built with thick, massive high-tensile steel, this structure is designed for heavy-duty scrap handling, sorting, or demolition work. Features the unmistakable factory-stamped, raised CAT logo welded directly to the main arm casing. This attachment has been meticulously measured to ensure a flawless fit for your machine or quick coupler setup. Verified Specifications & Physical Measurements: Pin Diameter: 80mm Class (Measures clean between 3-1/8” and 3-1/4”) Inside Ear Spacing (Stick Width): 12” inside-to-inside clearance Lower Pin Spread: 24” Upper Pin Spread: 34” Condition: Solid structural condition. Normal surface rust/oxidation from outdoor storage. All bores are round, straight, and ready to work. Unpainted, raw original steel so you can see exactly what you are buying. Compatibility & Cross-Reference Guide: With an 80mm pin and 12” stick width, this attachment is built for a massive range of 20-ton to 25-ton mid-sized excavators. It will pin directly onto, or easily adapt to, the following machine lines: Caterpillar: 320, 320B, 320C, 320D, 320E, 320F, 321, 322, 323, and 325 series running standard 80mm pins. John Deere: 200LC, 210G, 225, 230LCR, 240D, 245G, 250G Hitachi: EX200, EX220, ZX200, ZX210, ZX225, ZX240, ZX250 Komatsu: PC200, PC210, PC220, PC228, PC240 (Standard 12.25” ears—mounts cleanly using basic spacing shims). Other 80mm Makes: Fits similar 80mm pin-class setups from Kobelco (SK210/250), Case (CX210), Link-Belt, and Doosan. Buyer Note on Coupler Fitment: If your machine is running a standard hydraulic standard or progressive Pin-Grabber Quick Coupler (like a Geith, Miller, or original CAT coupler) sized for 80mm pins, this attachment will be picked up automatically. The variable slide on your pin-grabber will safely lock onto the 24” to 34” pin spread arrangement easily.
You Might Also Like
