Model: Dell Poweredge R530 - 2U Rackmount Server

CPU: 2x Intel Xeon E5-2630 V3's - Each one has 8 Cores/16 Threads running between 2.4GHz-3.2GHz | 16 Cores/32 Threads Total

RAM: 64GB Registered ECC DDR4

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 8x Front 3.5" Hot-Swap SAS/SATA Bays (All 8x Trays Incl.)

Storage Controller: Integrated SATA Controller (This unit does not have a SAS controller, so it cannot currently use SAS drives)

Remote Management: iDRAC 8 Basic

Networking: 4x 1GbE RJ-45 Ethernet Ports

‎

Rails: Available for $70

Bezel: Available for $10

Power: Dual Hot-Swap Redundant 495W PSUs

PCI-E Cards: None

Available Upgrades: Storage, Networking, PSUs, Rails, Bezel

Additional Notes: This server does not have a PERC card installed, so while it has a SAS compatible backplane, it does not have a SAS controller. Right now the server can only use SATA drives, though it could also work with SAS drives if you install a SAS controller

Work Done:

• BIOS, iDRAC, and Lifecycle Controller have all been reset and cleared
• All available firmware updates have been applied
• The RAM has been replaced with tested modules from our inventory

‎

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com