**Model:** Dell Poweredge R730XD - 2U Rackmount Server

**CPU:** 2x Intel Xeon E5-2680 V4's - Each one has 14 Cores/28 Threads running between 2.4GHz-3.3GHz | 28 Cores/56 Threads Total

**RAM:** 128GB Registered ECC DDR4 (4x32GB)

**Storage Drives:** None, various SSDs/HDDs available for purchase in-store

**Storage System:** 12x Front 3.5" Hot-Swap SAS/SATA Bays (All Trays Incl.)

**Storage Controller:** Dell PERC H730P Dual Mode Controller - Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode

**Remote Management:** iDRAC 8 Enterprise

**Networking:** 4x RJ-45 Ethernet Ports [2x10G|2x1G]

‎

**Rails:** Available for $70, with purchase of this server

**Bezel:** Available for $10

**Power:** Dual Hot-Swap Redundant 1100W PSUs

**PCI-E Cards:** None

**Available Upgrades:** Storage, Networking, Rails, Bezel, GPU Power cables (8+6 pin)

**Additional Notes:** None

**Work Done:**

* BIOS, iDRAC, LC, and RAID have all been reset and cleared

* The RAM has been replaced with tested modules from our inventory

* The CPUs have been replaced with higher performance models

* The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied

* The NDC has been replaced with a higher performance model with 10G ports

* The PSUs have been replaced with higher wattage models

‎

**Additional information is available upon request**

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.servers.gcbcomputers.com