Like the title says, this is a cold plunge made from a chest freezer. Put it together two years ago and has been running great. The main seams were sealed using marine JB weld epoxy putty. Silicone was used along the top railing that occasionally gets splashed. Rustoleum paint was used to help prevent the original freezer's paint getting damaged/scratched and corroding the steel sheet metal underneath. Added a high flow rate fan to help cool the freezer's compressor, and increase its long term lifespan. A large aquarium pump with washable filter keep the water moving so it has an even temperature everywhere, and filters out any small gunk in the water. An Inkbird temperature controller is used to control the turn on/off set temperature of the water. Works great as a cold plunge, or a chest freezer. Pictures included to show the system setup, and dimensions. The price includes the chest freezer, the extra cooling fan, the sealed seams, circulation pump with filter, and the temperature controller. If you would only like the chest freezer, I am happy to lower the price and remove the other bits. I'm happy to share more details, just let me know.