Ford 351W / 351 Windsor Performance Engine - Roush Heads, Solid Roller - Needs 2 Intake Valves
20 Hours
39
2
$3,650.00
Description
Condition
Payment Types Accepted
Zelle
VenmoFord 351 Windsor Performance Engine | Roush Heads | Solid Roller | 12:1 Compression
Built 351W performance engine, professionally machined and assembled with many high-end components and less than 10,000 miles since build. Perfect foundation for a serious street/strip car, hot rod, drag setup, or race project.
Over $9,000 in quality parts alone invested, not including machine work or labor.
During a routine inspection prior to listing, I discovered cylinders 2 and 3 have burnt intake valves (likely due to incorrect valve lash, or weak valve springs). From what I could see with my borescope, there is no sign of damage to the cylinder walls or tops of the pistons. All other cylinders are healthy measuring 145+ PSI on the compression test. To be straight forward, it will require pulling one cylinder head to replace the two intake valves and having the seats reworked if necessary. Also, all of the valve springs should be measured to ensure adequate spring pressure on the seat.
Major Components Include:
Roush Windsor Sr. cast iron heads, ported 210cc runners Edelbrock Victor Jr intake, port matched to cylinder heads Holley 4150HP carburetor MSD Pro-Billet Distributor Isky solid roller camshaft (.640 lift) Isky solid roller lifters Yella Terra shaft mount rockers KB hypereutectic pistons, .040 over Nodular iron crankshaft Full radius truck rods w/ ARP bolts Clevite H bearings 9 quart rear sump oil pan CSR Electric Water Pump Billet aluminum serpentine pulleys
Great opportunity to get a high-dollar engine package at less than half the cost of building one from scratch.
Price is $3,650. Serious buyers only. Cash in hand for pickup.
You Might Also Like
Ford 351W / 351 Windsor Performance Engine - Roush Heads, Solid Roller - Needs 2 Intake Valves
20 Hours
39
2
$3,650.00
Description
Condition
Payment Types Accepted
ZelleVenmoFord 351 Windsor Performance Engine | Roush Heads | Solid Roller | 12:1 Compression
Built 351W performance engine, professionally machined and assembled with many high-end components and less than 10,000 miles since build. Perfect foundation for a serious street/strip car, hot rod, drag setup, or race project.
Over $9,000 in quality parts alone invested, not including machine work or labor.
During a routine inspection prior to listing, I discovered cylinders 2 and 3 have burnt intake valves (likely due to incorrect valve lash, or weak valve springs). From what I could see with my borescope, there is no sign of damage to the cylinder walls or tops of the pistons. All other cylinders are healthy measuring 145+ PSI on the compression test. To be straight forward, it will require pulling one cylinder head to replace the two intake valves and having the seats reworked if necessary. Also, all of the valve springs should be measured to ensure adequate spring pressure on the seat.
Major Components Include:
Roush Windsor Sr. cast iron heads, ported 210cc runners Edelbrock Victor Jr intake, port matched to cylinder heads Holley 4150HP carburetor MSD Pro-Billet Distributor Isky solid roller camshaft (.640 lift) Isky solid roller lifters Yella Terra shaft mount rockers KB hypereutectic pistons, .040 over Nodular iron crankshaft Full radius truck rods w/ ARP bolts Clevite H bearings 9 quart rear sump oil pan CSR Electric Water Pump Billet aluminum serpentine pulleys
Great opportunity to get a high-dollar engine package at less than half the cost of building one from scratch.
Price is $3,650. Serious buyers only. Cash in hand for pickup.
You Might Also Like
