Model: Dell Poweredge R730 - 2U Rackmount Server

CPU: 2x Intel Xeon E5-2640 V4's - Each one has 10 Cores/20 Threads running between 2.4GHz-3.4GHz | 20 Cores/40 Threads Total

RAM: 64GB Registered ECC DDR4 (8x8GB)

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 8x Front 2.5" SATA Bays (4x Trays Incl)

Storage Controller: Integrated SATA Controller

Remote Management: iDRAC 8 Enterprise

Networking: 4x 1GbE RJ-45 Ethernet Ports

Rails: Available for $70, with purchase of this server

Bezel: Available for $10

Power: Dual Hot-Swap Redundant 750W PSUs

Available Upgrades: Storage, Networking, PSUs, Rails, Bezel

Additional Notes: This server does not have a PERC controller installed, so the front 2.5" bays are connected to the integrated SATA Controller. The backplane is compatible with SAS drives, though the system does not currently have a SAS controller, therefore only SATA drives can be used.

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared

• All available firmware updates have been applied

• The RAM has been replaced with tested modules from our inventory

• The CPUs have been replaced with higher performance models

• The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.gcbcomputers.com