3U Rackmount Anvil Audiopile Case Rack Rackmount
5 Hours
12
0
$150.00
Description
Condition
Payment Types Accepted
Venmo3U Rackmount Anvil Audiopile Case Rack Rackmount
https://www.audiopile.net/R3UE-10
Usually $195 + tax and shipping.
Like new, I just used briefly here at homw.
3U height
Removable front and rear covers.
All latches work like new.
Dimensions without lids: 20.75” x 11.5” x 7”
Dimensions with lids on: 20.75” x 18.25 x 7”
Axe-fx3 shown in photos is not included of course.
I live in Saratoga Springs and work by SLC airport. I am in Herriman, Draper almost daily, so should be easy to meet. Lagoon sometimes on weekends.
From Website:
This is the EWI Tourcase tm Model R3UE-10 rack case which has a 10" rack depth measured from the front rack rails to the rear rack rails. The rails are 3U (5.25") in height and are drilled and tapped for standard #10 x 32 racking screws. This rack is suitable for shallow depth, 19" wide rack gear.
The R3UE-10 side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with aluminum rivets. The rivets on the 2 recessed padded flip handles are backed with washers to ensure strength and durability. Mounted on the bottom of the case are 4 solid rubberized feet.
The case is equipped with two removable lids. Each lid has four heavy duty ball corners and the inside of the RUE series lids are fully padded with medium density foam rubber. The lids are secured to the case using 2 medium sized recessed butterfly latches. Either lid will fit on either side of the case, right-side up or upside down.
These are well made heavy duty cases manufactured to exacting tolerances and suitable for a variety of racking applications.
You Might Also Like
3U Rackmount Anvil Audiopile Case Rack Rackmount
5 Hours
12
0
$150.00
Description
Condition
Payment Types Accepted
Venmo3U Rackmount Anvil Audiopile Case Rack Rackmount
https://www.audiopile.net/R3UE-10
Usually $195 + tax and shipping.
Like new, I just used briefly here at homw.
3U height
Removable front and rear covers.
All latches work like new.
Dimensions without lids: 20.75” x 11.5” x 7”
Dimensions with lids on: 20.75” x 18.25 x 7”
Axe-fx3 shown in photos is not included of course.
I live in Saratoga Springs and work by SLC airport. I am in Herriman, Draper almost daily, so should be easy to meet. Lagoon sometimes on weekends.
From Website:
This is the EWI Tourcase tm Model R3UE-10 rack case which has a 10" rack depth measured from the front rack rails to the rear rack rails. The rails are 3U (5.25") in height and are drilled and tapped for standard #10 x 32 racking screws. This rack is suitable for shallow depth, 19" wide rack gear.
The R3UE-10 side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with aluminum rivets. The rivets on the 2 recessed padded flip handles are backed with washers to ensure strength and durability. Mounted on the bottom of the case are 4 solid rubberized feet.
The case is equipped with two removable lids. Each lid has four heavy duty ball corners and the inside of the RUE series lids are fully padded with medium density foam rubber. The lids are secured to the case using 2 medium sized recessed butterfly latches. Either lid will fit on either side of the case, right-side up or upside down.
These are well made heavy duty cases manufactured to exacting tolerances and suitable for a variety of racking applications.
You Might Also Like
