**Model:**Dell Poweredge R530 - 2U Rackmount Server

**CPU:**2x AMD Opteron 4284's - Each one has 8 Cores/8 Threads running between 3.0GHz-3.7GHz | 16 Cores/16 Threads Total

**RAM:**64GB Registered ECC DDR3

**Storage Drives:**None, various SSDs/HDDs available for purchase in-store

**Primary Storage System:**12x Front 3.5" Hot-Swap SAS/SATA Bays (9 Trays Incl)

**Secondary Storage System:**2x Internal 2.5" SAS/SATA Bays (Both Trays Incl)

**Storage Controller:**Dell PERC H310 HBA running IT Mode firmware - Compatible with Software RAID, such as ZFS, UnRAID, etc.

**Remote Management:**iDRAC 6 (EOL)

**Networking:**2x 1GbE RJ-45 Ethernet Ports

**Rails:**None

**Bezel:**None

**Power:**Dual Hot-Swap Redundant 750W PSUs

**Available Upgrades:**Storage, Networking

**Additional Notes:**The storage controller is not compatible with Hardware RAID

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared

• The RAM has been replaced with tested modules from our inventory

• The original RAID Controller has been repalced with the PERC H310

• The PERC H310 has been flashed with IT Mode firmware, and both BIOS and UEFI bootloaders have been installed

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.gcbcomputers.com