This tractor like new has been rarely used with only 48 hrs on it. Bought this Brand new in 2023. Was used primarily for snow removal in the winter, with very little mowing and weed spraying. With the tractor I have accessories of a LX2980 64’ snow blower, LA535 front end loader (never been used), 60 gallon 7 nozzle 3 point hitch Weed Sprayer and Land Pride RCR1260 rear mower. Selling because I no longer need it due to I am moving. There are no mechanical problems or other issues at all. All maintenance is up to date. Bought it for $53,500 for tractor and all accessories.

Tractor:

The 2023 Kubota LX2610HSDC is a compact 4WD utility tractor featuring a factory climate-controlled cab (A/C, heat, and stereo), a 24.8-gross-hp 3-cylinder liquid-cooled diesel engine, and a 3-range hydrostatic transmission. It includes a standard LA535 front-end loader with a quick-attach bucket. I bought

Engine & Performance

• Engine: Kubota D1305 3-cylinder diesel, 77.0 cu in displacement

• Gross Horsepower: 24.8 hp (avoids higher tier emission regulations)

• PTO Horsepower: 19.5 hp

• Transmission: 3-range Hydrostatic (HST) with cruise control

Hydraulics & Hitch

• Hydraulic Pump Flow: 8.7 gpm (total flow 33.1 L/min)

• 3-Point Lift Capacity: 2,139 lbs at lift point.

• PTO Ratings: Rear independent PTO (540 rpm) and Mid-PTO (2500 rpm)

Cab Features

• Factory-installed air conditioning and heating

• Integrated front and rear LED/halogen work lights, wipers, washers, and rear defogger

• Deluxe suspension seat with armrests and tilt steering wheel

Front Loader: Never been used.

The Kubota L535 is a front-end loader designed for Kubota LX series compact tractors (such as the LX2610 and LX3310). It features a maximum lift capacity of approximately 1,067 to 1,144 lbs at the pivot pin, a maximum lift height of about 94 inches, and uses a standard skid-steer quick-attach (SSQA) system.

Lift Performance

• Lift capacity at pivot pin (full height): ~1,067 lbs (484 kg) to 1,144 lbs

• Lift capacity 19.7 inches (500 mm) forward of pivot pin: ~769 to 850 lbs

• Maximum lift height (to pivot pin): ~94 inches (2,388 mm)

• Clearance with dumped bucket: ~72–75 inches

Snowblower:

The Kubota LX2980 is a 64 inch, two-stage commercial front mounted snowblower designed of Kubota B-series and LX-series tractors (such as the LX2610, LX3310, LX3520, and LX4020). It operates off the tractor's mid-PTO (2500 RPM), features standard hydraulic chute rotation, weighs roughly 565 lbs.

Specifications & Design

• Type: Two-stage commercial snowblower

• Cutting Width: 64 inches

• Drive System: Gear-driven design utilizing the tractor's mid-PTO

• Chute Control: Standard hydraulic rotation (with optional hydraulic deflection depending on configuration)

• Compatibility: Matched for Kubota LX2610, LX3310, LX3520, LX4020, and select B-series tractors using a specific subframe and driveline kit

Weed Sprayer:

Kubota 60 Gallon RTV Spot Sprayer and nozzle 3 point weed sprayer

The 60 Gallon 3-Point Sprayer has 6 roller pumps with torque arm and quick coupler. The 7 nozzle breakaway boom coverage is up to 140". Nozzles include check valve and quick caps. The heavy duty frame comes with skid plates. It has a chemically-resistant polyethylene tank, 100 PSI gauge, deluxe 18" sprayer wand, adjustable relief with gauge and forward mounted on/off valve with protected gauge and plumbing.

Product Description

• 60 PSI gauge

• 5.0 GPM demand pump

• RTV clamps

• Polyethylene tank with mold-in drain with cap

• 25' hose with spray gun

• Deluxe pistol grip handgun sprays up to 25' vertical and 35' horizontal

• Large 5" fill lid with tether

• 8' wiring harness with battery clips

Mower:

The Land Pride RCR1260 is a 60-inch (5-foot) utility rotary cutter designed for tractors requiring 20 to 60 HP. It features a 1-inch cutting capacity, a 60-HP rated cast iron gearbox, a 12 gauge reinforced welded deck, and a 24 inch round stump jumper.

Performance Specs

• Cutting Width: 60 inches (5 feet)

• Cutting Capacity: Up to 1-inch diameter material (grass, weeds, light brush)

• Cutting Height: 1 1/4 inches to 10 inches

• Tractor HP Requirement: 20 to 60 HP

• PTO Speed: 540 rpm

• Gearbox Rating: 60 HP

• Blade Tip Speed: 16,536 fpm

Physical Specs

• Hitch Type: Category 1, Quick-Hitch Compatible

• Deck Thickness: 12-gauge steel

• Stump Jumper: 10-gauge, 24-inch dish-shaped

• Approximate Weight: ~478 to 496 lbs

• Overall Width: 64 1/4 inches

• Overall Length: ~97 3/4 to 103 3/8 inches (with tailwheel)