Model: Supermicro 2U GPU Server | X9DRG-HF | 218-18 Chassis

CPU: 2x Intel Xeon E5-2690 V2's - Each one has 10 Cores/20 Threads running between 3.0GHz-3.6GHz | 20 Cores/40 Threads Total

RAM: 128GB Registered ECC DDR3 (4x32GB)

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Primary Storage System: 8x Front 2.5" Hot-Swap SAS/SATA Bays (RAID CONT)

Secondary Storage System: 2x Front 2.5" Hot-Swap SATA Bays (SATA CONT)

Storage Controller: LSI MegaRAID SAS 9271-8i RAID Controller (First 8 Bays) | Integrated SATA Controller (Last 2 Bays)

Remote Management: Supermicro IPMI 2.0

Networking: 2x 10G SFP+ Ports & 2x 1GbE RJ-45 Ethernet Ports

Rails: None

Bezel: None

Power: Dual Hot-Swap 1800W Redundant PSUs

Available Upgrades: Storage

Additional Notes: This server can take up to 2 dual-slot GPUs, though they must be server GPUs (sizing is exact, consumer GPUs will NOT fit)

Additional Notes: The PSUs are 1800W at 200-240V, 1200W at 120-140V, and 1000W at 100-120V. Part number is PWS-1K81P-1R

Work Done:

• BIOS has been reset to factory defaults

• IPMI has been reset to factory defaults

• The RAID Controller has been reset and cleared of prior configuration

• The RAM has been replaced with tested modules from our inventory

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.gcbcomputers.com