Model: Dell Poweredge R630 - 1U Rackmount Server

CPU: 2x Intel Xeon E5-2697 V4's - Each one has 18 Cores/36 Threads running between 2.3GHz-3.6GHz | 36 Cores/72 Threads Total

RAM: 128GB Registered ECC DDR4 (4x32GB)

Storage Drives: None, various SSDs/HDDs available for purchase in-store

Storage System: 8x Front 2.5" Hot-Swap SAS/SATA Bays (6x Trays Incl)

Storage Controller: Dell PERC H730 - Dual Mode Controller, supports both RAID Mode and HBA Mode for Software RAID

Remote Management: iDRAC 8 Enterprise

Networking: 2x 1GbE RJ-45 Ethernet Ports & 2x 10G SFP+ Ports

Rails: Available for $30, with purchase of this server

Bezel: Available for $10

Power: Dual Hot-Swap Redundant 495W PSUs

Available Upgrades: Storage, Networking, PSUs, Rails, Bezel

Work Done:

• BIOS, iDRAC, LC, and RAID have all been reset and cleared

• All available firmware updates have been applied

• The RAM has been replaced with tested modules from our inventory

• The CPUs have been replaced with higher performance models

• The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied

• The NDC has been replaced with a higher performance option

Additional information is available upon request

This listing is by GCB Servers, we have a large variety of server/enterprise grade equipment available, such as: Servers, switches, firewalls, routers, and more.

If you need a specific piece of equipment that you don't see listed, please contact us using the listed contact information.

Unit is available at 'GCB Computers', address is 1155 N Main Street, Suite #4 in Layton. Hours are Tuesday-Saturday 10am-6pm.

www.gcbcomputers.com