Telecaster Pickup Electronics 4-WAY TELECASTER PREWIRED KIT guitar fender partscaster
2 Hours
19
0
$110.00
Description
Condition
Payment Types Accepted
VenmoTelecaster Pickup Electronics 4-WAY TELECASTER PREWIRED KIT guitar fender partscaster
New is $145 + tax and shipping.
$110 without control plate
$120 with control plate
Original box included (see photos):
SKU T4 R-250k
Reverse Tele 4-way Prewired Kit - 250k
250k potentiometer
Switch Positions
1: Bridge
2: Bridge & Neck in Parallel
3: Neck
4: Bridge & Neck in Series (Humbucker Type Fullness)
Sometimes there is a long wait time for these...
I am a guitar tech, I verified fully working before removing from a tele on 8/16/26. Sounds great, works like new. Just was going to a different sound.
FYI - There are 2 different control plates for Telecasters. The “narrow” one has the tone and volume slightly closer together. This is NOT the narrow, but standard. You could likely squeeze or resolder to fit a narrow control plate, but a control plate is only @$10 on amazon.
Control plate is @$10 on amazon
2 knobs are @$5 on amazon
I live in Saratoga Springs and work by SLC airport. I am in Herriman and Draper almost daily, Lagoon in Farmington some weekends, so should be easy to meet.
Similar to this one:
https://emersoncustom.com/collections/prewired-kits/products/reverse-control-4-way-telecaster-prewired-kit
See reviews on Sweetwater:
https://www.sweetwater.com/store/detail/T3250K--emerson-custom-3-way-prewired-kit-for-fender-telecasters-250k-pots
SKU
T4-R-PREMIER
Description
This is a 4-Way Tele prewired assembly for Telecaster style guitars featuring 2 single coil pickups. It will drop into most American Fender Teles with no modification. Wired with 22 AWG vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with metric sized pots you may need to ream your control plate holes to accept the slightly larger US-Spec pots and buy US-Spec knobs.
**Control Plate, Switch Tip or Knobs Not Included**
Includes
(2) Emerson PREMIER PRO Solid Shaft Potentiometers
(1) Oak Grigsby 4-Way Switch
(1) Switchcraft 1/4" Mono Input Jack
(1) 0.047uf Emerson Paper in Oil Capacitor *(0.022uf are used with 500K-Ohm Pots Option)*
(1) Volume Mod
Wiring Diagram
Switch Positions
1: Bridge
2: Bridge & Neck in Parallel
3: Neck
4: Bridge & Neck in Series (Humbucker Type Fullness)
Additional Information
**BUILT & SPACED FOR USE ON STANDARD FENDER STYLE TELE CONTROL PLATES. CENTER TO CENTER OF VOLUME AND TONE POTS IS 2.50 INCHES**
Reverse Control Plate Setup Note: Volume, Tone & 4-way Switch. (Volume Control is closest to the bridge pickup for ease of use) **Control Plate Not Included**
You Might Also Like
Telecaster Pickup Electronics 4-WAY TELECASTER PREWIRED KIT guitar fender partscaster
2 Hours
19
0
$110.00
Description
Condition
Payment Types Accepted
VenmoTelecaster Pickup Electronics 4-WAY TELECASTER PREWIRED KIT guitar fender partscaster
New is $145 + tax and shipping.
$110 without control plate
$120 with control plate
Original box included (see photos):
SKU T4 R-250k
Reverse Tele 4-way Prewired Kit - 250k
250k potentiometer
Switch Positions
1: Bridge
2: Bridge & Neck in Parallel
3: Neck
4: Bridge & Neck in Series (Humbucker Type Fullness)
Sometimes there is a long wait time for these...
I am a guitar tech, I verified fully working before removing from a tele on 8/16/26. Sounds great, works like new. Just was going to a different sound.
FYI - There are 2 different control plates for Telecasters. The “narrow” one has the tone and volume slightly closer together. This is NOT the narrow, but standard. You could likely squeeze or resolder to fit a narrow control plate, but a control plate is only @$10 on amazon.
Control plate is @$10 on amazon
2 knobs are @$5 on amazon
I live in Saratoga Springs and work by SLC airport. I am in Herriman and Draper almost daily, Lagoon in Farmington some weekends, so should be easy to meet.
Similar to this one:
https://emersoncustom.com/collections/prewired-kits/products/reverse-control-4-way-telecaster-prewired-kit
See reviews on Sweetwater:
https://www.sweetwater.com/store/detail/T3250K--emerson-custom-3-way-prewired-kit-for-fender-telecasters-250k-pots
SKU
T4-R-PREMIER
Description
This is a 4-Way Tele prewired assembly for Telecaster style guitars featuring 2 single coil pickups. It will drop into most American Fender Teles with no modification. Wired with 22 AWG vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with metric sized pots you may need to ream your control plate holes to accept the slightly larger US-Spec pots and buy US-Spec knobs.
**Control Plate, Switch Tip or Knobs Not Included**
Includes
(2) Emerson PREMIER PRO Solid Shaft Potentiometers
(1) Oak Grigsby 4-Way Switch
(1) Switchcraft 1/4" Mono Input Jack
(1) 0.047uf Emerson Paper in Oil Capacitor *(0.022uf are used with 500K-Ohm Pots Option)*
(1) Volume Mod
Wiring Diagram
Switch Positions
1: Bridge
2: Bridge & Neck in Parallel
3: Neck
4: Bridge & Neck in Series (Humbucker Type Fullness)
Additional Information
**BUILT & SPACED FOR USE ON STANDARD FENDER STYLE TELE CONTROL PLATES. CENTER TO CENTER OF VOLUME AND TONE POTS IS 2.50 INCHES**
Reverse Control Plate Setup Note: Volume, Tone & 4-way Switch. (Volume Control is closest to the bridge pickup for ease of use) **Control Plate Not Included**
You Might Also Like
