Payment Types Accepted

Cash

Venmo

This bundle includes an Iwata NEO CN airbrush, Timbertech ABPST08 airbrush compressor, Iwata-Medea Universal Spray-Out Pot, air hose, quick-release fittings, paint thinner, and airbrush cleaner. All major components are very lightly used, with only a few painting sessions totaling approximately 4 hours of use. Everything has been cleaned and maintained carefully and is in excellent working condition.

Iwata NEO CN Airbrush

The NEO CN is Iwata's entry-level dual-action airbrush and is well suited for fine-to-medium detail work.

Features include:

• Dual-action trigger

• 0.35 mm needle/nozzle (N3 nozzle system)

• 0.24 oz and 0.10 oz fluid cups

• Nozzle removal key

• Iwata-brand quick-release fitting

The airbrush is in excellent condition and shows essentially no signs of wear. It was thoroughly cleaned after every use. The gaskets are in good condition, and the needle is perfectly straight and sharp. Cosmetically, it looks nearly new and performs accordingly.

Product reference:

https://www.amazon.com/dp/B004INERK4

Timbertech ABPST08 Compressor

This is the Timbertech Upgraded Airbrush Compressor ABPST08.

Features include:

• Single-piston, oil-free compressor

• 3-liter air tank

• Built-in moisture trap

• Advertised operating noise of approximately 47 dB

The compressor has also seen very little use and shows no notable wear. It runs properly and quietly and has been kept clean and well maintained.

Product reference:

https://www.amazon.com/dp/B07VT2F5N9

Iwata-Medea Universal Spray-Out Pot

This is the Iwata Universal Spray-Out Pot with built-in airbrush stand and pot filter. The pot is fully functional and has been thoroughly cleaned. It does show a small amount of use, including minor paint staining inside the pot and a small amount of paint residue on the lip of the nozzle-insert grommet that I was unable to remove. Aside from these minor cosmetic marks, it is clean and ready to use.

Product reference:

https://www.amazon.com/dp/B01DYN6ESG

Additional Supplies

The bundle also includes:

• Airbrush hose

• Quick-release fittings installed on the hose, compressor, and airbrush

• Approximately 3/4 bottle of paint thinner

• Approximately 2/3 bottle of airbrush cleaner

The hose is an aftermarket Amazon-brand hose but is durable, in good condition, and does not leak. The remaining paint thinner and cleaner are included at no additional cost.

Everything is being sold together as a complete airbrushing setup.

Original cumulative value: ~$200

The best way to contact me is via text. I try to check KSL once per day, but if you text me I can respond at essentially any reasonable time.