Payment Types Accepted

Cash

Venmo

The image shows a brand-new Alexapure GO Replacement Filter packaged inside its plastic blister shell alongside its folded Owner's Manual. This specific cylinder houses an ionic absorption micron filter designed exclusively for the Alexapure GO Water Filtration Bottle.⚙️ How to Setup and Replace Your Go FilterAccording to official instructions provided by Pure Filter Canada and Get Ultimate Now, you should follow these steps to prime and install this unit:Unpack: Carefully cut open the clear plastic blister packaging and remove the replacement filter assembly.Discard Stickers: Peel off and discard any protective stickers located on the bottom or connection threads of the filter.Remove Old Unit: Unscrew the sports cap from your existing bottle and pull out the old, depleted straw and filtration unit.Fill the Bottle: Fill your bottle with fresh tap water nearly all the way to the top fill line.Insert & Seal: Insert the new filter and straw assembly down into the bottle and screw the cap back on firmly.Flush and Activate: Open the drinking nozzle to expose the straw, tilt the bottle forward at roughly a 45-degree angle, and squeeze the body of the bottle firmly. This forces the water up through the carbon pores to clear out trapped air. Force the entire contents of the bottle out through the straw.Repeat: Refill the bottle and repeat the squeezing flush two more times. Once flushed three total times, your filter is fully activated and ready to clear field contaminants.