Payment Types Accepted

Cash

Venmo

Zelle

I obtained 3 of these from an estate. 20, 40 and 80 eter unts. I am keeping the 40 and 20 meter units, but due to now living in an apartment, I cannot use the 80 meter transceiver due to no possibility of building an 80 meter antenna. I have been using the 4o meter unit for the last two days, and have worked 20 states and two countries on FT-8. The receiver is very good on these and transit 4-5 watts on SSB. The 80 meter FT-8 freqency is set in firmware, but another alternate frequency and be programmed (easy) into it Fullt tested and ready to plug into 12 VDC , and to your computer soundcard. I have had the 40 meter unit on a LifePo 128 WH bbattery for 3 days and still many hours to go...(POTA?)See website at https://midnightdesignsolutions.com/phaser/The nice case was $20 option as as show in the images.These are no longer in production, and were sold as a kit. very good construction on this 80 meter unit. $90 , pick up downtown SLC area.

vFrequency coverage*:

Phaser-160 board: 1.840 MHz (FT8) and 1.842 MHz (JS8/ALT) Phaser-80 board: 3.573 MHz (FT8) and 3.578 MHz (JS8/Alt)

Phaser-60 board: 5.357 MHz (FT8) and 5.357 MHz (FT8/Alt)

Phaser-40 board: 7.074 MHz (FT8) and 7.078 MHz (JS8/Alt)

Phaser-30 board: 10.136 MHz (FT8) and 10.130 MHz (JS8/Alt)

Phaser-20 board: 14.074 MHz (FT8) and 14.078 MHz (JS8/Alt) Phaser-17 board: 18.100 MHz (FT8) and 18.104 MHz (JS8/Alt)

* FT8 frequency hard-coded

* Alt frequency soft-coded to JS8, user reprogrammable

Tx operation: Phasing SSB

Tx power output: 4 Watts (nominal)

Receive MDS: -109 dBm

Adjustments: Tx Drive

Frequency Calibration: 1-time

User Programmable ‘Alt’ frequency: 100 kHz to 30 MHz, 1 kHz resolution No external interface required.

Dimensions: 4.125” x 3.85” x 1.20”

DC Power: 12V @ 130ma (Rx), 1A (Tx)

SMT components: 8 (pre-installed)

Kits: All version available: 80m, 60m, 40m, 30m, 20m and 17m

Enclosure: Kits optionally available ... See below.