Fully Serviced/restored Singer Rocketeer
3 Days
12
1
$270.00
Description
Condition
Payment Types Accepted
Venmo
PayPalSinger 500a slant shank sewing machine with all metal linkages, bars, and rods.
24 built in utility and decorative stitches
Stitch cam capable.
Beltless, direct drive motor.
Comes with three class 66 bobbins, one stitch cam, digital manual, large desk (19x61), power cord and foot pedal.
The desk has 7 drawers and a ton of storage space. More pictures of the desk are available upon request.
Completely serviced:
Needle bar, presser foot bar, tension assembly, bobbin winder, cam stack, handwheel, and clutch all disassembled, thoroughly cleaned, oiled, synthetic grease applied to gears, and reassembled.
All gears, and metal moving parts cleaned and lubricated.
Motor removed, carbon brushes checked, Textolite handwheel gear and motor gear cleaned and lubricated.
Drip pan cloth, bobbin winder tire, and needle replaced. New LED bulb installed.
When I received the machine the bobbin carrier was missing and the side door was held on by tape. I have replaced the bobbin carrier with an original one from a donor machine and repaired the side door so that it open and closes normally.
This beauty stitches so smoothly now. A picture of a stitch sampler is included in the post. I only included about half of the 24 stitches, but all of the stitches function perfectly.
Video available of machine stitching available upon request.
Please message with any questions or to set up a time to try this wonderful machine.
You Might Also Like
Fully Serviced/restored Singer Rocketeer
3 Days
12
1
$270.00
Description
Condition
Payment Types Accepted
VenmoPayPalSinger 500a slant shank sewing machine with all metal linkages, bars, and rods.
24 built in utility and decorative stitches
Stitch cam capable.
Beltless, direct drive motor.
Comes with three class 66 bobbins, one stitch cam, digital manual, large desk (19x61), power cord and foot pedal.
The desk has 7 drawers and a ton of storage space. More pictures of the desk are available upon request.
Completely serviced:
Needle bar, presser foot bar, tension assembly, bobbin winder, cam stack, handwheel, and clutch all disassembled, thoroughly cleaned, oiled, synthetic grease applied to gears, and reassembled.
All gears, and metal moving parts cleaned and lubricated.
Motor removed, carbon brushes checked, Textolite handwheel gear and motor gear cleaned and lubricated.
Drip pan cloth, bobbin winder tire, and needle replaced. New LED bulb installed.
When I received the machine the bobbin carrier was missing and the side door was held on by tape. I have replaced the bobbin carrier with an original one from a donor machine and repaired the side door so that it open and closes normally.
This beauty stitches so smoothly now. A picture of a stitch sampler is included in the post. I only included about half of the 24 stitches, but all of the stitches function perfectly.
Video available of machine stitching available upon request.
Please message with any questions or to set up a time to try this wonderful machine.
You Might Also Like
